AMX HDMI-UTPRO-0808 instruction manual Xchm

HDMI-UTPRO-RX NetLinx Programming

HDMI-UTPRO-RX IR SEND_COMMANDs (continued)

XCHM

Changes the IR output pattern for the 'XCH' send command.

Syntax:

SEND_COMMAND <DEV>,"'XCHM-<extended channel mode>'"

Variables:

•extended channel mode = 0 - 4. Example:

SEND_COMMAND dvRXIR,"'XCHM 3'"

Sets the IR device's extended channel command to mode 3.

Mode 0 Example (default): [x][x]<x><enter>

SEND_COMMAND dvRXIR,"'XCH 3'"

Transmits the IR code as 3-enter.

SEND_COMMAND dvRXIR,"'XCH 34'"

Transmits the IR code as 3-4-enter.

SEND_COMMAND dvRXIR,"'XCH 343'"

Transmits the IR code as 3-4-3-enter.

Mode 1 Example: <x><x><x><enter>

SEND_COMMAND dvRXIR,"'XCH 3'"

Transmits the IR code as 0-0-3-enter.

SEND_COMMAND dvRXIR,"'XCH 34'"

Transmits the IR code as 0-3-4-enter.

SEND_COMMAND dvRXIR,"'XCH 343'"

Transmits the IR code as 3-4-3-enter.

Mode 2 Example: <x><x><x>

SEND_COMMAND dvRXIR,"'XCH 3'"

Transmits the IR code as 0-0-3.

SEND_COMMAND dvRXIR,"'XCH 34'"

Transmits the IR code as 0-3-4.

SEND_COMMAND dvRXIR,"'XCH 343'"

Transmits the IR code as 3-4-3.

Mode 3 Example: [[100][100]....]<x><x>

SEND_COMMAND dvRXIR,"'XCH 3'"

Transmits the IR code as 0-3.

SEND_COMMAND dvRXIR,"'XCH 34'"

Transmits the IR code as 3-4.

SEND_COMMAND dvRXIR,"'XCH 343'"

Transmits the IR code as 100-100-100-4-3.

Mode 4 Example:

•Mode 4 sends the same sequences as the 'CH' command.

•Only use Mode 4 with channels 0 - 199.

Instruction Manual – HDMI-UTPRO-0808 95