Appendix C – Managing Configuration Files
4.Enter the new name in the Name field in the
The new channel name replaces the default channel name in the Sources or Destinations list.
Name field – Edit in place (displays selected channel)
Customized channel name Selected channel
Default channel name
Note: If a channel is in more than one VM (virtual matrix), you must repeat Steps 3 and 4 for the channel in each of the VMs.
5.Customize additional channels by repeating Steps 3 and 4.
6.Load the .xcl configuration file onto the system (see page 117).
If the .xcl configuration file has been previously loaded to the system and channel names are the only modifications that have been made to the file, select Configure \ Configure Special –
Virtual Matrix \ Configure System Namespace.
If the .xcl file is being loaded for the first time (assumes an automatically constructed configuration is on the CPU), select Configure \ Configure All.
7.From the File menu, select Save As and save an .xcl file with a new name to the PC. (We strongly recommend making a duplicate copy every time the file is modified.)
Caution: The system must not be actively switching when loading this information onto the system.
Setting the Control Panel Password
The control panel on the HDMI UTPro can be locked and unlocked (see page 55). Locking the panel prohibits access to the system and can prevent accidental switching. The password can only be set with XNConnect.
Important: The password consists of five digits between 1 and 8 that are entered on the control panel using a
combination of five of the eight keys in the top row: Inputs 1, 2, 3, 4 and Outputs 1, 2, 3, 4 (these outputs are designated as 5, 6, 7, 8 for password purposes). Keys can be used multiple times.
The system connected to the PC must be powered up before the password can be loaded to the control panel. If not already connected, complete the first five steps of the instructions for “Discovering a System” on page 112.
Instruction Manual – | 114 |
|
|
