LapLink MN-LGD011-XX-US manual Protecting your security settings with a password

. . . Protecting your security settings with a password

Without knowledge of your password, users cannot view or change any of this information:

•Log-in names, passwords, and other security settings

•Phone numbers, passwords, and other information stored in your Address Book entries

•Privileges you have granted to guest computers and other settings in Remote Control Options

In addition, the same password is required for access to Connect over Modem and certain Logging features.

To protect your LapLink security settings:

1Click the Security button on the LinkBar.

2On the Local Security tab, check this box: Protect Local Security with a Password.

3In the Change Password dialog box, type a password at least 4 characters long in the New Password box. In the Confirm New Password box, type it again.

TIP Passwords are case-sensitive: capital letters and low- ercase letters are treated differently. For more secure passwords, mix the two cases.

4Click OK.

TIP To remove password protection, clear this box: Pro- tect Local Security with a Password. To change the pass- word currently in effect, click the Set Password button.

73