LapLink MN-LGD011-XX-US Configuring the host for rebooting, Rebooting and logging on to the host

Logging onto Windows NT, Windows 2000, XP or 2003 from the guest

You must always press CTRL+ALT+DELETE before you can log on to Windows.

To send CTRL+ALT+DELETE to the host, do one of these:

•Press the key combination specified for this purpose on the host. By default: CTRL+SHIFT+D.

•On the host’s Session menu, click Send CTRL+ALT+DELETE to the Host.

•Click the Remote Control icon at the bottom of the host’s LapLink workplace, and then click Feed

CTRL+ALT+DELETE.

Configuring the host for rebooting

You must configure a host to allow any guest to restart it during a Remote Control session. You can also require that the host be restarted whenever a Remote Control connec- tion is interrupted.

To configure a host computer for rebooting:

•On the Host tab of Remote Control Options (Options menu), check either or both of these boxes:

• Allow Guest to Reboot on Command Check this box to allow guests to restart the host using the Reboot Host command on their computers.

. . . Rebooting and logging on to the host

•Always Reboot When Guest

Disconnects Check this box to require that the host be restarted whenever a guest breaks a con- nection or the connection is broken accidentally.

Ensuring access to the host after a reboot

At the same time you are configuring a host for rebooting, you can configure it so that a guest can resume a LapLink connection after the host is rebooted. You can do this by setting up LapLink to run whenever Windows is started.

To configure a host so that it automatically runs LapLink each time Windows is started:

•On the Advanced tab of Program Options (Options menu), check this box: Always Start LapLink before Windows Logon Prompt.

Logging on to Windows NT When a Windows NT, Win- dows 2000, XP or 2003 host requires the user to press CTRL+ALT+DELETE at logon, a guest can press a special key combination specified on the host.

To specify the key combination for

CTRL+ALT+DELETE:

1On the Host tab of Remote Control Options (Options menu), change the key combination in this box: Send CTRL+ALT+DELETE to this computer when a guest presses this key combination.By default, it is CTRL+SHIFT+D.

2Press one of the chosen key combinations

89