AMX HDMI-UTPRO-0808 instruction manual Rear Panel Components, See

Overview and General Specifications

Rear Panel Components (continued)

Serial Port (RJ-12)	• Bi-directional RS-232
	• Baud rates 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 (default 9600)
	• RJ-12 connector
NetLinx LED	Blinks at 5 second intervals when a connection to a NetLinx Master is
	established.
Status LED	Non-functional.
Ready LED	Solid green indicates that NetLinx has fully booted and is ready.
HDMI Matrix Switching Input	The HDMI matrix switching connectors are located on the upper-half of the rear panel.
and Output Connectors	The HDMI input and output connectors allow for the use of cables from source and
	destination devices with HDMI connectors.
	These connectors also have local DDC (Display Data Channel) support with plug-and-
	play information provided by the HDMI UTPro.
	• HDMI inputs (IN 1-8) accept inputs from up to 8 HDMI source devices.
	• HDMI outputs (OUT 1-8) connect to HDMI inputs (INPUT 1-8) on the bottom
	(see HDMI Transport Input Connectors below).
	Note: Refer to the “Digital Video - HDMI Specifications” table for complete specifications
	(see page 19).
HDMI Transport Input	The HDMI inputs (INPUT 1-8) accept HDMI patch cables (provided) from the HDMI
Connectors	matrix switching outputs (OUT 1-8).
UTP RJ-45 Transport Output	The RJ-45 outputs (OUTPUT 1-8) provide connectivity for up to 8 HDMI-UTPRO-RX
Connectors	Receivers (FG1403-20) via UTP cable.
Other AMX Equipment
Included Accessories	• 8 HDMI-UTPRO-RX Receivers (FG1403-20); for specifications, see page 22
	• 8 desktop power supplies (12 V 1.25 A) with power cord (FG1090-155)
	• 8 connection cables (connect between HDMI matrix switching outputs and the HDMI
	transport inputs)
	• 1 power cord (standard US power cords are provided for installations within the US)
	• 2 rack mounting brackets for the enclosure
	Note: No A/V interface cables are supplied.
Compatible / Optional	• UDM-RC05 IR Remote Control (FG1402-70)
Equipment	• IR01 Infrared Emitter Module (FG-IR01)
	• IR03 External Infrared Receiver Module (FG-IR03)
	• MIO-R1 Mio Modero® R-1 Remote Control (FG147)
	• RS-232 Serial (DB-9/RJ-12) connection cable (FG-RS01)
	• RS-232 Serial (DB-9/RJ-12) connection cable kit with adapters (FG-RS01K)
	• 6 ft. (1.83 m) Ethernet crossover cable (CA2179-02)
	• Surface Mounting Bracket kit - for Receivers (FG525)

Instruction Manual – HDMI-UTPRO-0808 18