Appendix D – Creating Virtual Matrices
Creating a New Virtual Matrix
Important: Save a backup copy of the existing configuration file if you find it necessary to modify the file for any reason.
Process Overview
Creating a new virtual matrix involves creating virtual channels which must be assigned to the physical connectors and grouped into a virtual matrix. For more information on virtual matrices, see page 119. Four dialog boxes are used for creating a virtual matrix. The first is for assigning the signals to the VM; the second for assigning the signals to the physical matrix; the third for selecting the connector assignment method; and the fourth for completing the connector assignments. To access the Help file regarding an open dialog box, press F1.
1 | 2 | 4 | Verify Results |
FIG. 78 Four step process for creating a new virtual matrix
The Physical Matrix
The virtual channels need to be assigned to the physical matrix in the Assign Signals to Matrices box. The list in this box shows only physical matrices that are capable of routing the selected signal.
To view the properties of the connectors:
1.Select the Hardware tab.
2.Expand the enclosure and backplane and select the slot.
Selected slot
Board properties (board refers to internal hardware)
Signal path number
Signals allowed
Note: The HDMI UTPro enclosure displays an Optima logo.
Note: For additional information on creating virtual matrices, see the XNConnect Help file. To access the Help file topic for an open dialog box, press F1.
Instruction Manual – | 120 |
|
|
