AMX HDMI-UTPRO-0808 Overview and General Specifications, Applicability Notice, Product Notes

Overview and General Specifications

Overview and General Specifications

Applicability Notice

The information in this manual applies to the HDMI-UTPRO-0808, Twisted Pair Dist Kit (FG1047-88K).

HDMI-UTPRO-0808, Twisted Pair Distribution Kit (FG1047-88K)

The HDMI-UTPRO-0808, Twisted Pair Distribution Kit contains the following items:

Part	Quantity	Part #
HDMI-UTPRO-0808 (8x8 HDMI Matrix Switcher, UTP Distribution)	1	FG1047-88
(includes 8 HDMI patch cables)
KIT, (8) HDMI-UTPRO-RX with power supplies	1	KA1403-155

Note: The HDMI UTPro 8x8 Matrix Switcher (FG1047-88) and the Receivers with power supplies (FG1403-20) can also be ordered separately.

Product Notes

The HDMI UTPro 8x8 Matrix Switcher is used in conjunction with HDMI UTPro Receivers for sending HDMI over long distances on UTP cable.

HDMI UTPro Features

True 8x8 HDMI matrix switching, allowing any input to be switched to any or all outputs Incorporates HDMI® technology

HDCP 1.3 compatible

AMX HDCP InstaGate® Technology significantly reduces the HDCP latency and interruptions of protected content on all displays in the system

Native NetLinx® device

AMX Device Discovery enabled through AMX’s AutoPatch Duet module. Supports computer video up to 1920x1200

Supports HDTV up to 1080p

Pre-loaded with the most common EDID settings to ensure proper functionality with source devices

Features the AMX EDID Programmer allowing specific display EDID settings to be custom loaded on each input

Global presets and local presets TCP/IP (LAN 10/100) port RJ-12 (Serial) port RS-232 serial (Control) port

IR Control (optional) via the HDMI-UTPRO-RX Receiver Rack mounting ears included

Backed by AMX’s 3 year warranty (see warranty at www.amx.com)

HDMI UTPro Control Features

The HDMI UTPro supports two main protocols: TCP/IP and XNNet (protocol used by control panel). Several control options are available. Multiple control methods can be used on the same system.

Native NetLinx interface

Front mounted control panel standard (with security lockout)

AMX Control Devices – for control programming information, see the instruction manual for the specific interface

Supports third-party controllers over the Control (DB-9 serial) port (note that this port cannot provide the additional NetLinx functionality which is available through the LAN 10/100 port)

Note: Features and specifications described in this document are subject to change without notice.

Instruction Manual – HDMI-UTPRO-0808 11