Hypertec FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server Hardware External Features

Page 10

Windows NT, Windows 95/98, Windows for Workgroups, Microsoft LAN Manager, IBM LAN Server

♦AppleTalk MacOS EtherTalk

Windows-based setup and administration software, EtherP Admin, is supplied with the HyperNet Fastprint, making configuration and management quick and easy. The HyperNet Fastprint also supports configuration and management via the telnet protocol for networks without Windows- compatible machines.

External Features

This section describes the externally visible features of the HyperNet Fastprint print server.

Port Connectors

The HyperNet Fastprint’s three printer ports are located on its rear panel. Two identical parallel ports are labeled LPT1 and LPT2; the single serial port is labeled COM. These printer ports are independently configurable using the EtherP Admin program or the print server’s telnet interface. (See the Print Server Administration User’s Guide for information about configuring the print server’s ports.)

2

Index

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Multiprotocol Ethernet/Fast Ethernet Print Server Page FCC Warning Page Port Pinouts Index Vii Page Print Server Features External Features AppleTalk MacOS EtherTalkNetwork Cable Connector LPT1, LPT2, COM Installing the HyperNet Fastprint ServerPower On Self-Test Testing Your HyperNet Fastprint Contact your dealer for correction of the faulty unit110 mm Index Network Connection Network ProtocolsPort Pinouts Serial Port Index Ph +44 01488 LPT1
Top Page Image Contents