Hypertec FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server Hardware Network Connection

Page 18

Ports: Bi-directional 25-pin parallel ports ⋅ 2, 9-pin DTE serial port ⋅ 1

Parallel Port Bi-directional Communication: Hewlett-Packard PJL (Printer Job Language) supported

Network Connection

Network Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet

Network Data Transfer Rate: 10/100Mbps

Network Connector: RJ-45 connector for 10Base-T or 100BASE-TX unshielded twisted pair connection; NWay automatic speed negotiation supported.

Network Protocols

Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto-switching)

Transport Protocols: IPX/SPX, TCP/IP, NetBEUI, AppleTalk/EtherTalk

TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, lpd

10

Index

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Multiprotocol Ethernet/Fast Ethernet Print Server Page FCC Warning Page Port Pinouts Index Vii Page Print Server Features External Features AppleTalk MacOS EtherTalkNetwork Cable Connector LPT1, LPT2, COM Installing the HyperNet Fastprint ServerPower On Self-Test Testing Your HyperNet Fastprint Contact your dealer for correction of the faulty unit110 mm Index Network Connection Network ProtocolsPort Pinouts Serial Port Index Ph +44 01488 LPT1
Top Page Image Contents