Hawking Technology H-WU300 manual Step-by-Step Installation Guide

Page 15

3. Step-by-Step Installation Guide

This section will lead you through the installation of the Mini WLAN USB Adapter and IEEE802.11b WLAN software in detail. People who are familiar with the installation and settings of wireless device may refer to quick start guide to establish a network in a snap.

To establish your wireless network connection, the following steps should be executed:

1.Install the software by using the installation CD.

2.Install the 802.11b WLAN USB Adapter.

3.Install the required network protocols to communicate with your network.

Mostly, you will need to set the TCP / IP protocol.

The product is designed to operate under Windows 98SE, ME, 2000, XP, XP 2nd edition (subject to availability) and Windows CE (subject to availability). The installation procedure is about the same. Please follow up the installation wizard that provided by your system to install the software.

14

Image 15

Contents H-WU300 IEEE 802.11b Mini Wireless USB AdapterTrademarks & Copyright CE Mark WarningIMPORTANT NOTE FCC Radiation Exposure Statement 3. Step-by-Step Installation Guide Table of ContentsRegulatory Information Error! Bookmark not defined 1. Welcome 2. Quick Start to Wireless Networking101. Welcome 1.1 Kit Contents 1. Utility & Driver Installation Software 2. Acrobat Readera. One 802.11b WLAN USB Adapter b. One Software CD including 802.11b WLAN USB Adapter supports 1.2 Main Features of 802.11b WLAN USB Adapter802.11b WLAN USB Adapter features USB Connection Status LED1.3 Wireless Networking Scenarios B. Cooperate LAN Local Area Networking A. Peer-to-Peer Networking1.4 Advantages for Using Wireless Network 2.1 Installation 2. Quick Start to Wireless Networking4. Your Operating System will detect new device and verify the driver automatically. You may check it in “Device Manager”. See details of verifying the driver in User’s Guide Chapter 2.2 Connecting to an Existing Network Page 3. Step-by-Step Installation Guide 3. Click “Next” 3.1 Install the IEEE802.11b WLAN Driver / Utility4. Click “Yes” 6. Select the Program Folder and click “Next” 7. Click “Next” 10. Click “Finish”. The installation is complete 3.1.1 Additional Setup Processes 3.1.2 Disable Windows XP Zero-Configuration 3. Windows XP 3.2 Verifying the Driver/Utility1. Windows 98SE/Me 2. Windows3.3 IEEE802.11b WLAN Utility 3.4 Basic Setting for Infrastructure Mode A. 802.11 Ad Hoc 3.5 Basic Setting for 802.11Ad Hoc Mode/Ad Hoc ModeB. Ad Hoc Mode 3.6 Advanced Settings 3.7 Encryption Function b. Select “Manual 128 bits ASCII” and enter a 13-digit WEP Key c. Select “Manual 64 bits” and enter a 10-digit WEP Keyd. Select “Manual 128 bits” and enter a 26-digit WEP Key 3.8 Remove your Mini Wireless USB Adapter IEEE802.11bWLAN Utility Remove 3.9 Uninstall the IEEE802.11b WLAN Utility / Driver1. Make sure the Utility is closed 2. Open Control Panel, and then click Add or Remove Programs4.1 LAN Status Tab 4. Using the Utility4.3 Site Survey Tab 4.2 Link Information Tab4.5 About Tab 4.4 Diagnostic Tab5.1 Surveying the Network Neighborhood 5. Network Application5.2 File Sharing 5.3 Using the Shared Folder 6. Product Specifications Off Power Off WarrantyMedia access LED indicatorContact USA Irvine, CA Europe Rotterdam, The Netherlands Techsupport PhoneEmail techsupport@hawkingtech.com