Items | Functions |
Link | Shows the status of each port. When |
| it is red, it means the connection is |
| down. Otherwise, it is green. |
Mode | Choose the Speed mode of port: |
| 10/100/1000, Half/Full. To disable |
| the port, choose “Disable”. If you set |
| to |
| negotiation. |
FDX Flow Contro | To Enable the FDX Flow control, |
l | click the check box. |
Max Frame lengt To adjust the Frame length, enter the
hvalue you want. The larger the value is, the better network performance you will have. The default is 1518.
The Maximum value is 9600.
To save the configuration of the system, click “Apply”. To see the latest port status, click the refresh button.
4.2.3 VLANs
VLAN configuration is for dividing the LAN into subnet groups for better network management. The benefit is that the user can move one client to another subnet group without physically moving the machine. There are up to 24 entries to set up.
•To add a new VLAN entry,
1.Select the ports by clicking their respective check boxes.
2.Enter the VLAN ID number for the entry.
3.Click “Add” to add it in the table.
4.Don’t forget to click the “Apply” button to save the settings.
•To remove the entry,
Select the entry you want to remove, and click “Remove” to delete it.
Note: When the PVID is the same as the VID, the entry cannot be removed.
•To modify the entry,
Select the entry you want to change and set up the new configurations. After the changes are made, click “Modify” to save.
Caution: Because the settings for VLAN, Port Aggregation, and Mirror are dependent upon each other, make 
sure that the settings will not influence the others. Do not activate more than one function per port.
17