iHome iH11 Using The Optional Remote Control Unit, Install/Replace the Remote Control Battery

Using The Optional Remote Control Unit

	 iPod Play/Pause Button
	 Power Off /Alarm Reset Button
	 Forward Button
Volume - Button 	 Reverse Button
	 Volume + Button
Sleep Button 
	 Mute Button
	 Snooze/Dimmer Button

Install/Replace the Remote Control Battery
The remote control battery is already installed at the factory. When the				
remote control stops operating or its range seems reduced, it is time
to replace the battery with a new one.
1.	The battery door is located on the back end of the remote control.
2.	Pull the battery door to release the battery door latch and take out
	the battery.	
3.	Insert a CR2032 battery, checking that the + and – sides of the
	battery match the drawing inside the battery compartment.	Installing Remote Battery
4. Replace the battery door.
Note: Make sure you dispose of batteries properly (see your local regulations).

The Remote Control controls basic functions on the iH11 and certain iPod functions when the iPod is docked in the iH11. For best results, aim remote control towards the remote sensor on the left side of the unit.

To check for iPod compatibility

iH11 is an advanced system and supports most updated iPod features. To ensure your iPod works properly with the iH11, please update your iPod firmware with the latest version, available through iTunes.

4