Setting Up the iH11, Charging your iPod

Setting Up the iH11

Setting the Clock Time

Note: Press the  Clock Adj. Button once during normal operation to view the current time display format (12 hour or 24 hour format). 12 hour is the default format.

1.Press and hold the  Clock Adj. Button for 2 seconds until the display flashes. Press the  Hour Set Button until the current hour is displayed. Next, press the  Sleep/Minute Set Button to set the current minute.

2.Press the  Clock Adj. Button again to confirm the clock setting. You should hear 2 beeps indicating the clock time is set.

3.For 12 hour or 24 hour time format setting: Press the  Alarm Set Button during time setting to set 12-hour or 24-hour display format. Remember to set the correct AM or PM time (an icon to the right of the time display is the PM indicator; there is no AM indicator).

4.During daylight saving time, set the  DST Switch located on the backside of the unit to +1 to advance the time one hour. The DST Icon will appear next to the time display to indicate DST is on. Set the switch to -1 to quickly set the time back one hour at the end of daylight saving time.

Charging your iPod

Note: Please make sure you are using the correct insert for your iPod (see page 1) and that it is properly docked into the iH11. Failure to do so may damage your iPod.

1.While your iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). The iH11 will not overcharge your iPod. Note that other non-docking iPods will NOT charge.