Using the iBN180
Setting the Clock
The unit features a Daylight Saving Time (DST) Switch on the back of the unit to quickly add or subtract an hour to account for Daylight Saving Time and Standard Time differences. Before setting the time, move the DST Switch to +1 to add an hour or to
1. Press and hold the Clock Button for 2 seconds until the clock display flashes and a beep sounds.
2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting).
Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display.
3.To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display, press the 
Button during time setting while time digits are flashing.
4.Press the Clock Button to confirm the time and exit clock setting mode. 2 beeps will confirm clock setting is complete.
FM Radio
1.Press and release the Mode Button as needed until the FM indicator icon and current FM radio station appear on the display.
2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). Extend the FM antenna for best reception.
3.Press the 
or 
Buttons to adjust the volume on the unit.
4.When you are through listening, press the 
Button to turn the unit off.
8