GarrettCom CS14, CSN14 manual Www . GarrettCom . com

CS14, CSN14 Series Converter Switches Installation and User Guide (02/06)

3.7CS14H and P Series , DC-powered, -48VDC, 24VDC and 12VDC Installation This section describes the proper connection of the -48VDC leads (or 24VDC,

12VDC leads) to the DC power terminal block on the Magnum CS14H hardened media converter (as shown in Figure ). The DC terminal block on the Magnum CS14H is located on the left side of the unit and is equipped with three (3) screw-down lead posts. The power terminals are identified as positive (+) and negative (-), and they are floating inside the unit so that either of the terminal may be

grounded by the user if desired. The chassis is “earth” or ground (GND).

The connection procedure is straightforward. Simply insert the DC leads to the CS14H’s power terminals, positive (+) and negative (-) screws. The use of Ground (GND)

www . GarrettCom . com

48