CS14, CSN14 Series Converter Switches | Installation and User Guide (02/06) |
3.8.1Connecting Twisted Pair
The following procedure describes how to connect a
twisted pair segment to the
1.Using standard twisted pair media, insert either end of the cable with a
2.Connect the other end of the cable to the corresponding device.
3.Use the LINK LED to ensure proper connectivity by noting that the LED will be illuminated when the unit is powered and proper connection is established. If this does not help, ensure that the cable is connected properly and that the device on the other end is powered and is not defective.
4.For Port # 1 or 1SW, if the LINK LED is not illuminated, move the switch which has a
www . GarrettCom . com
51