GarrettCom 4K16 Connecting Ethernet Media, Copper, Connecting Fiber Optic ST-type, twist-lock

Page 21

Magnum 4K16 Switches Installation and User Guide

(12/05)

3.2Connecting Ethernet Media

The Magnum 4K16 Switches are specifically designed to support all standard Ethernet media types within a single Switch unit. This is accomplished by complementing standard RJ-45 copper parts with a family of Fiber-port Modules (FKMs) which can be individually selected and configured per-port. See Section 2.4 for a description of the FKMs.

The various media types supported along with the corresponding IEEE

802.3 and 802.3u standards and connector types are as follows:

IEEE Standard

Media Type

Max. Distance

Port Module

Fiber:

mm1 Fiber

2.0km (6,562 ft)

 

100BASE-FX

FKM-MSC, -MST

 

sgl.m2 Fiber

20.0km (95K ft)

FKM-SSC

 

sgl.m2 Fiber

40.0km (12K ft)

FKM-SSCL

small form factor

mm1 Fiber

2.0km (6,562 ft)

FKM-MTRJ,

Copper:

 

 

 

10BASE-T & 100BASE-TX twisted pair 100m (328 ft)

RJ45

1 mm = multi-mode

2 sgl.m = single-mode

3.2.1Connecting Fiber Optic ST-type, “twist-lock”

The following procedure applies to installations using a FKM with ST-type fiber connectors. This procedure applies to ports using a FKM-MST.

1.Before connecting the fiber optic cable, remove the protective dust caps from the tips of the connectors on the FKM. Save these dust caps for future use.

2.Wipe clean the ends of the dual connectors with a soft cloth or lint-free lens tissue dampened in alcohol. Make certain the connectors are clean before connecting.

Note: One strand of the duplex fiber optic cable is coded using color bands at regular intervals; you must use the color-coded strand on the associated ports at each end of the fiber optic segment.

3.Connect the Transmit (TX) port (light colored post) on the Magnum FKM to the Receive (RX) port of the remote device. Begin with the color-coded strand of the cable for this first TX-to-RX connection.

4.Connect the Receive (RX) port (dark colored post on the PM) to the Transmit

(TX) port of the remote device. Use the non-color coded fiber strand for this.

5.The LINK LED on the front of the FKM will illuminate when a proper connection has been established at both ends (and when power is ON in the unit). If LINK is not lit after cable connection, the normal cause is improper cable polarity. Swap the fiber cables at the FKM connector to remedy this situation.

www . GarrettCom . com

15

Image 21
Contents 4K16 Switches Trademarks Magnum 4K-Series 4K16 Switches Installation and User GuideCanadian Emission Contacting GarrettCom, IncTable of Contents TroubleshootingIntroduction Magnum 4K16 FIBER-PORT Modules FKM Rev B 12/00 Addition of Warnings in the French Language Personal Switches , 10/100Mb Personal Hubs, 10Mb seriesMedia Converters, 10Mb and 100Mb series Specifications Power Supply Internal Manual switch-selections and jumpersDC Power Supply Options WarrantyFKM-2ST FKM-2SCFKM-2MTRJ FKM-2SSCIntroduction Inspecting the Package and Product Magnum 4K16F Switch chassis Product Description Magnum 4K16 Switches1a Front view, 16-port Magnum 4K16 Series Switches 3 Fiber-Ports, FKM-ST, FKM-SC, FKM-MTRJ Rear View4 4K16, 10/100 Dual-speed switched ports, RJ-45 copper only Frame Buffering and Latency Up-link Switch at port#1 for CascadingMagnum 4K16 Switches Installation and User Guide 12/05 „ Plug-and-Play installation for high performance switching „ RJ-45 copper ports, with N-way auto-negotiation„ Full-duplex or Half-duplex operation, auto-sensing Applications Router Locating Magnum 4K16 Switches InstallationConnecting Fiber Optic ST-type, twist-lock Connecting Ethernet MediaIeee Standard Media Type Max. Distance Port Module Fiber CopperConnecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InConnecting Mtrj Fiber Optic Snap-In Media Ieee StandardRack-mounting Installation of aOperation Switching FunctionalityFiltering and Forwarding Address LearningPWR Auto-negotiation full-duplex mode Flow-control, Ieee 802.3x standard Fiber FKM-MSC 100Mbps multi-mode FX-SC-type, snap-in connector Introduction Magnum 4K16 Fiber-Port Modules FKMProduct Description FKM-Blank Before Calling for Assistance No Problem Found When Calling for AssistanceAppendix a Warranty Information B3.0 Applications for DC Powered Switches Power Supply Internal 125 VDC Option Industrial ApplicationB4.1 UL Requirements B4.0 InstallationAppendix D Internal DC DUAL-SOURCE Power Option B7.0 TroubleshootingB5.0 Operation B6.0 Ordering InformationC5.0 Installation C6.0 Ordering Information C5.1 UL RequirementsExample Magnum 4K16-48VDC C7.0 Operation

4K16 specifications

GarrettCom 4K16 is a state-of-the-art communication platform designed to meet the demands of modern industrial networks. It combines advanced technology with robust features to provide reliable and efficient performance in challenging environments. This device is particularly well-suited for applications requiring high-speed data transfer, such as video surveillance, process control, and smart grid communications.

One of the standout features of the GarrettCom 4K16 is its ability to support 4K video streaming, making it ideal for industries that rely on high-definition video surveillance. The platform offers impressive bandwidth capabilities, allowing for the seamless transmission of large video files without compromising quality or speed. This is particularly important in security-critical applications where every frame matters.

In terms of its technological architecture, the 4K16 incorporates advanced processing power and cutting-edge software that enhance its operational efficiency. The device is equipped with multiple ports, facilitating connections to a range of devices, and supports various protocols, ensuring compatibility with existing infrastructures. This versatility allows organizations to integrate the 4K16 into their current systems with minimal disruption.

The 4K16 also excels in its rugged design, making it suitable for deployment in harsh environments. It boasts enhanced protection against dust, moisture, and temperature fluctuations, ensuring reliable performance even in challenging conditions. This durability is complemented by features such as extended operating temperature ranges and vibration resistance, making it an ideal choice for industrial applications.

Moreover, the GarrettCom 4K16 emphasizes network security as a core component of its design. With integrated security features, it safeguards sensitive data and protects against unauthorized access. This is crucial for industries that handle critical data, such as energy and utilities, where security breaches could have significant repercussions.

In summary, the GarrettCom 4K16 is a powerful and versatile communication platform tailored for industrial applications. Its high-bandwidth capabilities, robust design, and emphasis on security position it as a leading choice for organizations seeking reliability and performance in their networking solutions. Whether for video surveillance, process control, or communication in smart grid applications, the 4K16 stands out as a premium solution that meets the evolving needs of modern industries.