GarrettCom 4K16 manual Connecting Fiber Optic SC-type, Snap-In, Connecting Single-Mode Fiber Optic

Page 22

Magnum 4K16 Switches Installation and User Guide

(12/05)

3.2.2Connecting Fiber Optic SC-type, "Snap-In"

The following procedure applies to installations using a FKM with SC-type fiber connectors, i.e., using FKM-MSC, FKM-SSC single-mode, and FKM10-MSC.

When connecting fiber media to SC connectors, simply snap on the two square male connectors into the SC female jacks of the FPM until it clicks and secures.

3.2.3Connecting Single-Mode Fiber Optic

When using single-mode fiber cable, be sure to use single-mode fiber port connectors. Single-mode fiber cable has a smaller diameter than multi-mode fiber cable (9/125 microns for single-mode, 50/125 or 62.5/125 microns for multi-mode where xx/xx are the diameters of the core and the core plus the cladding respectively). Single-mode fiber allows full bandwidth at longer distances, and may be used to connect 100 Mb nodes up to 10 Km 18Km with the FKM-SSC and 40 Km with the FKM-SSCL.

The same procedures as for multi-mode fiber applies to single-mode fiber connectors. Follow the steps listed in Section 3.2.2 above.

3.2.4Connecting MTRJ Fiber Optic “Snap-In”

The “MTRJ” is a multi-mode fiber connector considered as a “small form- factor”, because of its small compact size. It looks almost like an RJ-45 port, but compact in size and black color. The MTRJ’s small size and ease of connection make it a good choice for 100Mbps fiber environment. FKM-MTRJ fiber may be used to connect 100 Mb nodes up to 2 Km at full duplex and 412m at half-duplex.

When connecting fiber media to MTRJ connectors, simply snap in the square male connectors into the MTRJ female jacks of the FPM until it clicks and secures.

3.2.5Connecting Twisted Pair (RJ-45,CAT3, CAT5, Unshielded or Shielded)

The RJ-45 ports of the Magnum 4K-Series can be connected to the following two media types: 100BASE-TX and 10BASE-T. CAT 5 cables should be used when making 100BASE-TX connections. When the ports are used as 10BASE-T ports, CAT 3 may be used. In either case, the maximum distance for unshielded twisted pair cabling is 100 meters (328 ft).

Media

IEEE Standard

Connector

Twisted Pair (CAT 3, 4, 5)

10BASE-T

RJ-45

Twisted Pair (CAT 5)

100BASE-TX

RJ-45

NOTE : It is recommended that high quality CAT. 5 cables (which work for both 10 Mb and 100Mb) be used whenever possible in order to provide flexibility in a mixed-speed network, since dual-speed ports are auto-sensing for either 10 and 100Mb/s.

The following procedure describes how to connect a 10BASE-T or 100BASE- TX twisted pair segment to the RJ-45 port. The procedure is the same for both unshielded and shielded twisted pair cables.

www . GarrettCom . com

16

Image 22
Contents 4K16 Switches Magnum 4K-Series 4K16 Switches Installation and User Guide TrademarksContacting GarrettCom, Inc Canadian EmissionTroubleshooting Table of ContentsIntroduction Magnum 4K16 FIBER-PORT Modules FKM Rev B 12/00 Addition of Warnings in the French Language Personal Hubs, 10Mb series Personal Switches , 10/100MbMedia Converters, 10Mb and 100Mb series Specifications DC Power Supply Options Manual switch-selections and jumpersPower Supply Internal WarrantyFKM-2MTRJ FKM-2SCFKM-2ST FKM-2SSCIntroduction Inspecting the Package and Product Product Description Magnum 4K16 Switches Magnum 4K16F Switch chassis1a Front view, 16-port Magnum 4K16 Series Switches Rear View 3 Fiber-Ports, FKM-ST, FKM-SC, FKM-MTRJ4 4K16, 10/100 Dual-speed switched ports, RJ-45 copper only Up-link Switch at port#1 for Cascading Frame Buffering and LatencyMagnum 4K16 Switches Installation and User Guide 12/05 „ RJ-45 copper ports, with N-way auto-negotiation „ Plug-and-Play installation for high performance switching„ Full-duplex or Half-duplex operation, auto-sensing Applications Router Installation Locating Magnum 4K16 SwitchesIeee Standard Media Type Max. Distance Port Module Fiber Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock CopperConnecting Mtrj Fiber Optic Snap-In Connecting Fiber Optic SC-type, Snap-InConnecting Single-Mode Fiber Optic Media Ieee StandardInstallation of a Rack-mountingFiltering and Forwarding Switching FunctionalityOperation Address LearningPWR Auto-negotiation full-duplex mode Flow-control, Ieee 802.3x standard Fiber Introduction Magnum 4K16 Fiber-Port Modules FKM FKM-MSC 100Mbps multi-mode FX-SC-type, snap-in connectorProduct Description FKM-Blank Before Calling for Assistance When Calling for Assistance No Problem FoundAppendix a Warranty Information Power Supply Internal 125 VDC Option Industrial Application B3.0 Applications for DC Powered SwitchesB4.0 Installation B4.1 UL RequirementsB5.0 Operation B7.0 TroubleshootingAppendix D Internal DC DUAL-SOURCE Power Option B6.0 Ordering InformationC5.0 Installation Example Magnum 4K16-48VDC C5.1 UL RequirementsC6.0 Ordering Information C7.0 Operation

4K16 specifications

GarrettCom 4K16 is a state-of-the-art communication platform designed to meet the demands of modern industrial networks. It combines advanced technology with robust features to provide reliable and efficient performance in challenging environments. This device is particularly well-suited for applications requiring high-speed data transfer, such as video surveillance, process control, and smart grid communications.

One of the standout features of the GarrettCom 4K16 is its ability to support 4K video streaming, making it ideal for industries that rely on high-definition video surveillance. The platform offers impressive bandwidth capabilities, allowing for the seamless transmission of large video files without compromising quality or speed. This is particularly important in security-critical applications where every frame matters.

In terms of its technological architecture, the 4K16 incorporates advanced processing power and cutting-edge software that enhance its operational efficiency. The device is equipped with multiple ports, facilitating connections to a range of devices, and supports various protocols, ensuring compatibility with existing infrastructures. This versatility allows organizations to integrate the 4K16 into their current systems with minimal disruption.

The 4K16 also excels in its rugged design, making it suitable for deployment in harsh environments. It boasts enhanced protection against dust, moisture, and temperature fluctuations, ensuring reliable performance even in challenging conditions. This durability is complemented by features such as extended operating temperature ranges and vibration resistance, making it an ideal choice for industrial applications.

Moreover, the GarrettCom 4K16 emphasizes network security as a core component of its design. With integrated security features, it safeguards sensitive data and protects against unauthorized access. This is crucial for industries that handle critical data, such as energy and utilities, where security breaches could have significant repercussions.

In summary, the GarrettCom 4K16 is a powerful and versatile communication platform tailored for industrial applications. Its high-bandwidth capabilities, robust design, and emphasis on security position it as a leading choice for organizations seeking reliability and performance in their networking solutions. Whether for video surveillance, process control, or communication in smart grid applications, the 4K16 stands out as a premium solution that meets the evolving needs of modern industries.