AS Used in this Publication

	GEH–6505
	WARNINGS, CAUTIONS, AND NOTES
	AS USED IN THIS PUBLICATION
WARNINGS	Warning notices are used in this publication to emphasize that hazardous voltages, cur-
	rents, or other conditions that could cause personal injury exist in this equipment or
	may be associated with its use.
	Warning notices are also used for situations in which inattention or lack of equipment
	knowledge could cause either personal injury or damage to equipment.
CAUTIONS	Caution notices are used for situations in which equipment might be damaged if care
	is not taken.
NOTES	Notes call attention to information that is especially significant to understanding and
	operating the equipment.
	This document is based on information available at the time of its publication. While
	efforts have been made to ensure accuracy, the information contained herein does not
	cover all details or variations in hardware and software, nor does it provide for every
	possible contingency in connection with installation, operation, and maintenance.
	Features may be described herein that are not present in all hardware and software
	systems. GE Electrical Distribution & Control assumes no obligation of notice to
	holders of this document with respect to changes subsequently made.
	GE Electrical Distribution & Control makes no representation or warranty, expressed,
	implied, or statutory, with respect to, and assumes no responsibility for the accuracy,
	completeness, sufficiency, or usefulness of the information contained herein. No
	warrantees of merchantability or fitness for purpose shall apply.
REFERENCES	POWER LEADER™ is a registered trademark of GE Company.
	Modbus RTU is a registered trademark of AEG Schneider Automation.
	For details of the Modbus RTU protocol, refer to PI-MBUS-300 Rev. E from
	Modicon/AEG Schneider Automation.
	For details of RS485 communications, refer to the EIA-485 standard.

REFERENCES