Gefen GTB-USB2.0-4LR user manual Receiver Unit Descriptions

Page 10

RECEIVER UNIT DESCRIPTIONS

1USB Output Port (1 - 4)

Connect the USB devices to these ports.

2USB Connection Indicators (1 - 4)

These LEDs will turn bright green when a USB device has been connected.

3CAT-5 Input Jack

Connects the Receiver Unit to the Sender Unit using CAT-5 cabling.

4Host Connection Indicator

This LED will turn bright green once the host USB device has been connected to the Sender Unit. The Receiver Unit must also be connected to the Sender Unit.

55V DC Locking Power Connector

Connect the included 5V DC locking power supply to this connector. Screw in the threaded connector until ﬁnger tight.

7

Image 10

Contents USB 2.0 LR Port Extender Technical Support Hours Asking for AssistanceTechnical Support Write ToContents GefenToolBox USB 2.0 LR 4-Port Extender About Gefen Why GefenToolBox?Introduction How It WorksOperation Notes Features FeaturesPackage Includes Sender Unit Layout Front Panel Top PanelHost Connection Indicator Sender Unit DescriptionsReceiver Unit Layout Receiver Unit Descriptions How to Connect the USB 2.0 LR 4-Port Extender Connecting and Operating USB 2.0 LR 4-PORT ExtenderWiring Diagram for the USB 2.0 LR 4-Port Extender Using the LED Indicators TroubleshootingChecking the Installation Network Cable Wiring Diagram Pin ColorSpecifications Warranty Page Rev A4 Nordhoff St., Chatsworth CA