Gefen GTB-USB2.0-4LR user manual Sender Unit Descriptions, Host Connection Indicator

Page 8

SENDER UNIT DESCRIPTIONS

1USB Input Port

Connect the USB host device to this port.

2Host Connection Indicator

This LED will turn bright green once the host USB device has been connected. to the Sender Unit.

3CAT-5 Output Jack

Connects the Sender Unit to the Receiver Unit using CAT-5 cabling.

45V DC Locking Power Connector

This receptacle can be used to connect an additional 5V DC locking power supply (sold separately) if the host computer does not provide enough power for operation. Normally, only the Receiver is powered by an external 5V DC locking power supply (included).

5

Image 8

Contents USB 2.0 LR Port Extender Asking for Assistance Technical SupportTechnical Support Hours Write ToContents About Gefen Why GefenToolBox? IntroductionGefenToolBox USB 2.0 LR 4-Port Extender How It WorksOperation Notes Package Includes FeaturesFeatures Sender Unit Layout Front Panel Top PanelHost Connection Indicator Sender Unit DescriptionsReceiver Unit Layout Receiver Unit Descriptions Wiring Diagram for the USB 2.0 LR 4-Port Extender Connecting and Operating USB 2.0 LR 4-PORT ExtenderHow to Connect the USB 2.0 LR 4-Port Extender Checking the Installation TroubleshootingUsing the LED Indicators Network Cable Wiring Diagram Pin ColorSpecifications Warranty Page Rev A4 Nordhoff St., Chatsworth CA