Gefen GTB-USB2.0-4LR user manual Connecting and Operating USB 2.0 LR 4-PORT Extender

Page 11

CONNECTING AND OPERATING

THE USB 2.0 LR 4-PORT EXTENDER

How to Connect the USB 2.0 LR 4-Port Extender

1.Connect the USB source to the USB 2.0 LR 4-Port Extender Sender Unit using the supplied USB cable.

2.Connect up to four USB devices to the USB 2.0 LR 4-Port Extender Receiver Unit.

NOTE: Powered USB hubs may be connected to these ports up to a maximum connection of 14 USB peripherals (including hubs). Overall speed and power is divided among the active devices.

3.Connect the USB 2.0 LR 4-Port Extender Sender Unit and Receiver Unit together with a CAT-5, CAT-5e or CAT-6 cable.

NOTE: Do not exceed 330 feet (100 meters).

4.Connect the included 5V DC Locking Power Supply to the Receiver Unit. Do not overtighten the threaded locking connectors. Plug the power supply into an available electrical outlet using the included AC power cord.

Wiring Diagram for the USB 2.0 LR 4-Port Extender

Gefen

CAT5 LINK CABLE

USB 2.0 CABLE

USB 2.0 Source

Sender

(Up to 330 ft)

USB 2.0 HDD

USB 2.0 Mouse

Receiver

USB 2.0 Keyboard

USB 2.0 Printer

GTB-USB2.0-4LR

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USB 2.0 LR Port Extender Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works About Gefen Why GefenToolBox?Introduction GefenToolBox USB 2.0 LR 4-Port ExtenderOperation Notes Package Includes FeaturesFeatures Front Panel Top Panel Sender Unit LayoutSender Unit Descriptions Host Connection IndicatorReceiver Unit Layout Receiver Unit Descriptions Wiring Diagram for the USB 2.0 LR 4-Port Extender Connecting and Operating USB 2.0 LR 4-PORT ExtenderHow to Connect the USB 2.0 LR 4-Port Extender Checking the Installation TroubleshootingUsing the LED Indicators Pin Color Network Cable Wiring DiagramSpecifications Warranty Page Rev A4 Nordhoff St., Chatsworth CA
Top Page Image Contents