Half load button
This function is useful and economical when baskets are not fully loaded. It decreases the duration of the programme and reduces the consumption of water and energy.
Remember to load both baskets. When using the Half load function we recommend that you reduce the dose of detergent that is normally used for a complete load.
Set the Half load function before the start of a washing programme. It is not possible to set the Half load while a washing programme is in progress.
The Half load function is not available for all washing programmes. Refer to 'Washing programmes'. Press the half load button to activate the function. If the function is available, the related indicator comes on
Programme indicators A and B
These indicators have also an auxiliary function in the following operations:
•Adjustment of the level of the water softener.
•Activation or deactivation of the acoustic signals.
Setting mode
The appliance must be in setting mode for these operations:
•To start a washing programme.
•To adjust electronically the level of the water softener.
•To activate or deactivate the acoustic signals.
Switch on the appliance. The appliance is in setting mode when:
•All the programme indicators are off and the End indicator flashes.
Switch on the appliance. The appliance is not in setting mode when:
•Only one programme indicator is on.
–Cancel the washing programme to go back to the setting mode. Refer to 'Select and start a washing programme'.
Acoustic signals
The acoustic signals indicate that:
•The washing programme is completed.
•The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals
1.Switch on the appliance. Make sure that the appliance is in setting mode.
2.Press and hold the Start/Cancel button until the programme indicator (A) flashes and the programme indicator (B) comes on.
3.Press immediately the Start/Cancel button. The programme indicator (A) comes on and the programme indicator (B) starts to flash.
4.After a few seconds, the programme indicator (A) goes off and the End indicator comes on. The programme indicator (B) continues to flash.
5.Press the Start/Cancel button, the End indicator goes off. The acoustic signals are deactivated.
6.Switch off the appliance to confirm the operation.
8
