Fill with detergent
30 |
20 |
1.Press the release button (3) to open the lid (4) of the detergent dispenser.
2.Put the detergent in compartment (2).
3.If the washing programme has a prewash phase, put a small quantity of detergent in compartment (1).
4.If you use detergent tablets, put the tablet in compartment (2).
5.Close the lid. Make sure that it locks into position.
Detergent tablets from different manufacturers dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residual.
Using combi detergent tablets
When you use tablets, that contain salt and rinse aid, do not fill the salt container and rinse aid dispenser.
Be sure that these tablets are applicable for the water hardness in your area (refer to the instructions on the packaging of the products).
1.Adjust manually and electronically the water softener to the lowest level.
2.Set the dosage of rinse aid dispenser to the lowest position.
Using again separately detergent, salt and rinse aid
1.Fill the salt container and the rinse aid dispenser.
2.Adjust manually and electronically the water softener to the highest level.
3.Start a washing programme without dishes.
4.When the washing programme is completed, adjust the water softener to the water hardness in your area.
5.Adjust the rinse aid dosage.
17
