OPERATING THE HOME THEATER AUDIO PROCESSOR
TONE CONTROL 
This menu option will allow the user to adjust the bass and treble settings. These features were designed to allow the user to adjust the sound to their taste.
Both the treble and bass settings can be adjusted in 1db increments between
Use the ▼ and ▲ buttons on the front panel to select either the treble or bass option (default for both options are +00dB).
Use the ◄ and ► buttons on the front panel to change settings for the selected option.
When finished, press the ▼ or ▲ to move to another selection. Alternately, the user can press the OK button to immediately cycle to the next option.
To return to the previous menu, press the EXIT button. To exit the entire Menu System, press the MENU button.
AUDIO SETUP 
This menu option will allow the user to set favorite processing modes for both the S/PDIF and HDMI inputs. Additionally, audio enhancement modes can also be set in this menu option. The following features are available in this menu system:
•SPDIF FAV PROC - This feature is used to set the default processing mode for the S/PDIF input. Selectable processing modes can be found on page
14(default is DIRECT).
•HDMI FAV PROC - This feature is used to set the default processing mode for the HDMI input. Selectable processing modes can be found on page 14 (default is DIRECT).
•DRC - This feature will apply compression of loud sounds over a certain threshold while quiet sounds remain untreated (default is OFF).
•ENHA. - This feature is used to set an enhancement mode. The following enhancement modes are available (default is OFF):
1.Night+ Mode - This mode can be used to watch dynamic content at low volume levels. This works by increasing the volume of quiet passages, while decreasing the volume of load passages.
2.Voice+ Mode - This mode will isolate and enhance dialog for clearer sounding vocals.
3.Volume+ Mode - This mode will equalize the volume level when listening to a source that has large variation in volume level. (i.e. Television broadcast and advertisement volume differences.)
Use the ▼ and ▲ buttons on the front panel to select the desired option.
Use the ◄ and ► buttons on the front panel to change the setting or the selected option.
18