RS-232 SERIAL CONTROL
| General Functions |
|
|
Function | Description |
#ACTIVEBOLO | Enables the boot loader |
|
|
#FADEFAULT | Sets IP Configurations to default settings |
#RMTIRADD | Set the remote IR channel |
#RSTIP | Sets IP configuration to default |
#ACTIVEBOLO Function
The #ACTIVEBOLO function enables the boot loader. See the boot loader instructions on page 28.
Syntax:
#ACTIVEBOLO
Parameters:
None
Notes:
This command must be typed twice in order to activate the boot loader.
#FADEFAULT Function
The #FADEFAULT function sets all inputs and outputs to factory (default) settings.
Syntax:
#FADEFAULT
Parameters:
None
Notes:
The #FADEFAULT function will set the default routing state: Input 1 - Output 1, Input 2 - Output 2, Input 3 - Output 3, and so on.
21