IP CONTROL
IP Configuration
The IP Configuration page is used to set the IP settings that will be used to access the Web interface. The following items can be configured from this menu.
•IP Address (Default: 192.168.0.70)
•Subnet (Default: 255.255.255.0)
•Gateway (192.168.0.1)
•Port (Default: 80)
••
••
To change these settings follow the steps below.
1.Enter the desired network information into the fields provided.
2.Press the “Save” button to initiate the change(s).
Note: After this command is complete the user will be returned to the View Matrix Status page. Settings made on this page will not take effect until the unit is restarted. Disconnect the power from the unit and reconnect power for changes to take effect.
At anytime, the “Reset” button can be pressed to return the IP settings to their defaults.
27