Generac Power Systems 005036-0, 004945-1 owner manual Installation Diagram

Page 9

Section 4 — Installation Diagram

179.5mm[7.07"]

KNOCKOUT SUITABLE FOR 1", 1-1/4", 1-1/2" CONDUIT SIZE 3 PLACES

271mm[10.67"] 26.5mm[1.04"]

MOUNTING HOLES Ø6.3mm[Ø0.25"]

597mm[23.50"]	561mm[22.09"

PADLOCK

(CUSTOMER SUPPLIED) LOCATION

34mm[1.34"]

KNOCKOUT SUITABLE

FOR 3/4" & 1" CONDUIT SIZE

KNOCKOUT SUITABLE

FOR 1", 1-1/4", 1-1/2" CONDUIT SIZE

324mm[12.76"]

Image 9

Contents Automatic Transfer Switch  General Hazards  Installation Table of ContentsInside Front Cover Back CoverIntroduction Transfer Switch Data DecalEquipment Description General InformationSafe USE of Transfer Switch Transfer Switch EnclosureIntroduction to Installation Connecting Power Source and Load LinesFunctional Tests Adjustments Connecting Start Circuit WiresManual Operation Operation‹ 3.2.1 Close to Normal Source Side Generator Tests Under Load Voltage ChecksATS HS Type Transfer Switch Drawing No F0016-B Installation DiagramElectrical Data Utility Meter SocketPanelboard Electrical Data Electrical Data Detail B-B Exploded Views and Parts ListDescription Automatic Transfer Switch Transfer SW-HSB 200A 2P Generac Power Systems, Inc ATS HS Type Transfer Switch Warranty Generac Power SYSTEMS, INC. WARRANTY/SERVICE