Eizo CG242W user manual Troubleshooting, Problems Possible cause and remedy

Page 23

4.Troubleshooting

4.Troubleshooting

If a problem still remains after applying the suggested remedies, contact your local dealer.

•No-picture problems : See No.1 - No.2

•Imaging problems : See No.3 - No.14

•Other problems : See No.15 - No.18

•USB problems : See No.19

Problems	Possible cause and remedy
1. No picture	• Check whether the power cord is connected correctly. If
• Power indicator does not light.	the problem persists, turn off the monitor, and then turn
	it on again a few minutes later.
	• Turn the main power switch on.
	• Press .
• Power indicator is lighting blue.	• Set each adjusting value in <Brightness> or <Gain> to
	higher level (page 18).
• Power indicator is lighting orange.	• Switch the input signal with .
	• Operate the mouse or keyboard.
	• Turn on the PC.
• Power indicator is flashing orange.	• There is a problem in the device that uses DisplayPort
	connection. Solve the problem, and turn off the main
	power of the monitor, and then turn it on again.
	Refer to the manual of the device connected to the
	DisplayPort for details.
2. The message below appears.	This message appears when the signal is not input
	correctly even when the monitor functions properly.
• This message appears when no signal is input.	• The message shown left may appear, because some
(This is displayed for about 40 seconds)	PCs do not output the signal soon after power-on.
	• Check whether the PC is turned on.
	• Check whether the signal cable is connected properly.
	• Switch the input signal with .

23

Image 23

Contents How to Setup Please read the Setup Guide separate volume Location of Caution Statement Page Cabinet CleaningTo use the monitor comfortably LCD PanelTable of Contents Introduction FeaturesEnter button Controls and FunctionsTo use ColorNavigator Disk contents and software overviewUtility Disk Basic Operation Basic Operation and FunctionsMain menu Sub menu Reference FunctionsAnalog Input Setting Screen ResolutionCompatible Resolutions/Frequencies Resolution Display Mode Frequency Dot ClockMac OS Setting ResolutionWindows Vista Windows XPOther than Windows Adjustment ProcedureDisplaying Screen Correctly Analog Input Only WindowsAdjust by using Screen menu in the Adjustment menu Adjust the output signal range Dynamic Range of the signal FineContrast Mode Adjusting ColorSimple Adjustment Switching FineContrast Mode To Select FineContrast ModeIcons Functions FineContrast Mode Custom SRGB Advanced Adjustments Adjustment menuAdjustment Contents Mode Function Displaying Lower ResolutionsDigital Input Setting Power SavingAnalog Input Off Timer System Monitor Power Indicator Using Off TimerHow to lock How to unlockTo undisplay Setting Power IndicatorSetting Eizo Logo Display Changing OrientationProblems Possible cause and remedy TroubleshootingCheck whether the signal setting of your PC matches Following resolutions Attaching an Arm Setup ProcedureConnection examples Connecting Two PCs to the MonitorSelecting input signal Input signal setting PerformanceRequired system environment Connecting to the USB HUBUtilizing USB Universal Serial Bus How to set Setting Range of FrequencySpecifications USB Default settingsUinit mm inch DimensionsSignal Remarks Pin Assignment DVI-I ConnectorDisplayPort Connector Pin No SignalGlossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingAPPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie