Eizo CG242W Connecting Two PCs to the Monitor, Connection examples, Selecting input signal

Page 27

5. Reference

5-2. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I connector and DisplayPort connector on the back of the monitor.

Connection examples

DVI-I DisplayPort

	PC 1	PC 2
	Signal Cable
	(FD-C39 enclosed)
(Ex.1) Digital	DVI	Signal Cable
		Signal Cable
		(PP200 optional)
	Signal Cable	DisplayPort Digital
	Signal Cable
	D-Sub(FD-C16 enclosed)
(Ex.2) Analog	mini 15
	pin

Selecting input signal

Switch the input signal with . Input signal switches each time is pressed. When the signal is switched, the active signal type (DVI digital, DVI analog or DisplayPort) appears at the top right corner of the screen.

Input Signal Selection button

The monitor recognizes the connector through which PC signals are input. When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC.

Input signal setting	Performance
Auto	If one of the PC turned off or became to power saving mode, the other
	signal is automatically displayed.
Manual	The monitor detects only the PC’s signals currently displaying automatically.
	Select the active input by pressing .

Note

•When "Auto" is selected for <Input Signal>, the power saving mode of the monitor activates only if both PCs are in power saving mode.

27

Image 27

Contents How to Setup Please read the Setup Guide separate volume Location of Caution Statement Page Cabinet CleaningTo use the monitor comfortably LCD PanelTable of Contents Introduction FeaturesEnter button Controls and FunctionsDisk contents and software overview Utility DiskTo use ColorNavigator Basic Operation Basic Operation and FunctionsMain menu Sub menu Reference FunctionsAnalog Input Setting Screen ResolutionCompatible Resolutions/Frequencies Resolution Display Mode Frequency Dot ClockMac OS Setting ResolutionWindows Vista Windows XPOther than Windows Adjustment ProcedureDisplaying Screen Correctly Analog Input Only WindowsAdjust by using Screen menu in the Adjustment menu Adjust the output signal range Dynamic Range of the signal FineContrast Mode Adjusting ColorSimple Adjustment Switching FineContrast Mode To Select FineContrast ModeIcons Functions FineContrast Mode Custom SRGB Advanced Adjustments Adjustment menuAdjustment Contents Mode Function Displaying Lower ResolutionsSetting Power Saving Analog InputDigital Input Off Timer System Monitor Power Indicator Using Off TimerHow to lock How to unlockTo undisplay Setting Power IndicatorSetting Eizo Logo Display Changing OrientationProblems Possible cause and remedy TroubleshootingCheck whether the signal setting of your PC matches Following resolutions Attaching an Arm Setup ProcedureConnection examples Connecting Two PCs to the MonitorSelecting input signal Input signal setting PerformanceConnecting to the USB HUB Utilizing USB Universal Serial BusRequired system environment How to set Setting Range of FrequencySpecifications USB Default settingsUinit mm inch DimensionsSignal Remarks Pin Assignment DVI-I ConnectorDisplayPort Connector Pin No SignalGlossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingAPPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie