1. Introduction
1-2. Controls and Functions
14
17
16 
15
Adjustment menu |
(ScreenManager®*) |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
10 11 | 12 | 13 |
1 | Sensor | Detects ambient brightness. Auto EcoView function | |
2 | Adjustment Lock | This function locks the buttons to retain the status adjusted or set once. (page 21) | |
| button |
|
|
3 | Input Signal Selection | Switches input signals for display when two PCs are connected to the monitor. (page | |
| button | 27) |
|
4 | Mode button | Allows you to switch the FineContrast mode. (page 16) | |
5 | Auto button | Performs the function to adjust the screen automatically. (analog input only) (page 13) | |
6 | Enter button | Displays the Adjustment menu, determines an item on the menu screen, and | |
|
| saves values adjusted. (page 9) | |
7 | Control buttons | Chooses an adjustment item or increases/decreases adjusted values for | |
| (Left, Down, Up, Right) | advanced adjustments using the Adjustment menu. (page 9) | |
8 | Power button | Turns the power on or off. |
|
9 | Power indicator | Indicates monitor’s operation status. | |
|
| Blue: Operating |
|
|
| Flashing blue (2 times for each): When the timer is set for ColorNavigator, | |
|
| notifies that a recalibration is required (for CAL mode or EMU mode). | |
|
| Orange: Power saving | Off: Power off |
10 | Main Power switch | Turns the main power on or off. | |
|
|
|
|
11 | Power connector | Connects the power cord. |
|
12 | Input signal | ||
| connectors |
|
|
13 | USB port (Up) | Connects the USB cable to use the software that needs USB connection, or to use | |
|
| USB Hub function. |
|
14 | USB port (Down) | Connects a peripheral USB device. | |
15 | Stand | Used to adjust the height and angle of the monitor screen. | |
16 | Security lock slot | Complies with Kensington’s MicroSaver security system. | |
17 | Cable holder | Covers the monitor cables. |
|
*ScreenManager ® is an EIZO’s nickname of the Adjustment menu.