Plinius Audio P10 manual XLR Balanced Mono, Termination Quality, Bi-Wiring

Page 15

XLR BALANCED MONO

As with RCA Bridged Mono, this option configures your amplifier to drive one loudspeaker, but from one balanced line input connected to the RIGHT XLR Input. In balanced mono mode the only input made to your preamplifier is to the RIGHT channel XLR input. The LEFT channel XLR input is not connected.

Next your loudspeakers are connected to both positive (+) channel output terminals. So the positive red connection on your loudspeaker is connected to the red RIGHT amplifier output, and the negative black connection on the loudspeaker should be connected to the red LEFT amplifier output. DO NOT CONNECT ANYTHING AT ALL TO THE NEGATIVE (-) TERMINALS. MAKING A CONNECTION TO THE NEGATIVE (-) TERMINALS OF THE AMPLIFIER IN THIS MODE CAN CAUSE SERIOUS DAMAGE!

You can still connect two loudspeakers using the lower positive (+) amplifier output terminals. This is explained in the bi-wiring section following.

Now turn the ACS switch fully counter-clockwise so that it is in the XLR Balanced Mono position. It is now safe to switch on your amplifier.

TERMINATION QUALITY

Quality of the connections must be examined to ensure that high performance trouble free operation is enjoyed. Check that the connections are tight but do not over tighten. If bare wires are used make sure that no loose strands of wire short cross the other terminals or the amplifier chassis. When using plugs such as bananas, be sure to use good quality plugs with a firm fit.

BI-WIRING

Bi-wiring uses two pairs of loudspeaker cables for each channel loudspeaker. You will notice that the rear panel of your Plinius SA-Reference has two pairs of output terminals for this purpose. When using bi- wires in a STEREO installation, connect each wire pair to a corresponding pair of binding posts (one cable to the top pair, one cable to the bottom) paying special attention to positive (+) red and negative (-) black polarity. With a MONO setup remember that your speaker wires must use the red positive (+) output posts ONLY. Connect one speaker cable to the top positive (+) red binding posts, and the other speaker cable to the lower positive (+) red binding posts.

15

Image 15
Contents Page Serial Number Final Test Certified By Design Philosophy Contents Precautions Amplifier Features Front Panel Mute SwitchClass a Switch Page Amplifier Configuration Selector Amplifier Features Rear PanelInput Terminals Amplifier Configuration Selector ACSOutput Terminals Stereo BALANCED/UNBALANCED SignalsOutput Terminals BRIDGED/MONO Mains SwitchGround Lift Switch Mains Power Cord IEC ConnectorInstallation and Operation Placement and VentilationMains Voltage Connection Rear Panel Showing Location of INPUT/OUTPUT Terminals INPUT/OUTPUT ConnectionRCA Stereo RCA Bridged MonoXLR Stereo BI-WIRING XLR Balanced MonoTermination Quality Phasing or Polarity Connecting the Mains SupplyEcologic Control SA-REFERENCE FeaturesError Detection Fuse ProtectionMAINS/LINE Fuse LED Brightness ControlLoudspeaker Selection WHY Class a is Better Specifications Pages 7,20 IndexContact Details

P10 specifications

Plinius Audio has long been regarded as a pioneer in the high-fidelity audio world, and the Plinius P10 exemplifies their commitment to delivering exceptional sound quality. This robust stereo power amplifier is designed to meet the needs of audiophiles who demand both performance and reliability.

One of the standout features of the Plinius P10 is its impressive power output. Capable of delivering 200 watts per channel into an 8-ohm load, and even more at lower impedances, the P10 can drive a wide range of speakers with authority. This capability ensures that even the most demanding speaker systems can achieve their full potential, providing dynamic and engaging sound reproduction across all frequencies.

The P10’s build quality is equally remarkable. Designed with a solid aluminum chassis, the amplifier not only looks stunning but also minimizes electromagnetic interference, contributing to a cleaner audio signal. The internal components are meticulously selected, featuring high-grade capacitors, custom transformers, and high-current output transistors. This attention to detail results in a level of performance that is both sophisticated and reliable, ensuring long-term operational excellence.

One of the key technologies incorporated into the P10 is its direct-coupled architecture. This design eliminates the need for output capacitors, providing a more natural sound by preserving the integrity of the audio signal. Coupled with an advanced Class A/B operation, the amplifier delivers warmth and richness without sacrificing detail, making it ideal for critical listening sessions.

Another noteworthy aspect of the Plinius P10 is its flexible connectivity options. It comes equipped with both balanced XLR and unbalanced RCA inputs, allowing users to integrate it seamlessly into various audio systems. This versatility makes the P10 an excellent choice for both stereo and multi-channel configurations.

Heat management is crucial for any high-performance amplifier, and the P10 excels in this area as well. Designed with efficient thermal dissipation in mind, it features large heatsinks that help maintain optimal operating temperatures, even during extended listening sessions. This not only ensures consistent performance but also increases the amplifier's lifespan.

Audiophiles will appreciate the P10’s ability to deliver a sonic experience that captures the essence of the original recording. Its transparent soundstage, expansive imaging, and precise dynamics make it a standout choice for those serious about achieving audio nirvana.

In conclusion, the Plinius Audio P10 stereo power amplifier combines power, elegance, and advanced technology, making it an outstanding option for any audio enthusiast. With its ability to drive complex speaker loads effortlessly and produce a breathtaking soundstage, the P10 represents the very best in high-end audio engineering.