Plinius Audio P10 manual Input Terminals, Amplifier Configuration Selector ACS

Page 9

INPUT TERMINALS

Input terminals for your Plinius SA-Reference Power Amplifier are easily accessible and fitted to the top centre area of the rear panel. A brief summary of connection possibilities is listed below, while a more detailed explanation follows later in this instruction manual.

RCA INPUTS LEFT & RIGHT: These standard RCA terminals are for use with unbalanced signals from most signal sources such as audio preamplifiers.

XLR BALANCED INPUTS LEFT & RIGHT: XLR connectors fitted to this amplifier are for use with balanced line signals from audio preamplifiers. Balanced signals are carried via a three way cable that connects all three pins at each end of the interconnect cable.

The XLR pin configuration used in all Plinius product is:

PIN 1 to GND

PIN 2 to +Signal

PIN 3 to -Signal

NOTE: Because of the way our XLR and balanced inputs are configured it is not possible to connect both XLR and RCA at the same time.

AMPLIFIER CONFIGURATION SELECTOR (ACS)

The Amplifier Configuration Selector (ACS) is a unique switching method that exploits all of the operational features of your Plinius SA-Reference Power Amplifier. By using this switch it is possible to operate your amplifier with either balanced or unbalanced signals and achieve a stereo or mono output.

Stereo or Mono use of this amplifier will depend on the type of ancillary equipment employed with your system. If you wish to use this amplifier as a single channel (mono) Power Amplifier in a stereo high fidelity system, then another SA-Reference will be required for the other channel. This will provide an extremely high performance option.

RCA STEREO

RCA BRIDGED MONO

XLR BALANCED MONO XLR STEREO

ALL MONO/BRIDGE OPTIONS USE RIGHT INPUT

AND LEFT + RIGHT+ OUTPUTS ONLY

AMPLIFIER CONFIGURATION SELECTOR

REFER TO OWNERS MANUAL FOR USAGE INSTRUCTIONS

AMPLIFIER CONFIGURATION SELECTOR

9

Image 9
Contents Page Serial Number Final Test Certified By Design Philosophy Contents Precautions Amplifier Features Front Panel Mute SwitchClass a Switch Page Amplifier Configuration Selector Amplifier Features Rear PanelInput Terminals Amplifier Configuration Selector ACSOutput Terminals Stereo BALANCED/UNBALANCED SignalsGround Lift Switch Mains SwitchMains Power Cord IEC Connector Output Terminals BRIDGED/MONOInstallation and Operation Placement and VentilationMains Voltage Connection Rear Panel Showing Location of INPUT/OUTPUT Terminals INPUT/OUTPUT ConnectionRCA Stereo RCA Bridged MonoXLR Stereo BI-WIRING XLR Balanced MonoTermination Quality Phasing or Polarity Connecting the Mains SupplyError Detection SA-REFERENCE FeaturesFuse Protection Ecologic ControlMAINS/LINE Fuse LED Brightness ControlLoudspeaker Selection WHY Class a is Better Specifications Pages 7,20 IndexContact Details

P10 specifications

Plinius Audio has long been regarded as a pioneer in the high-fidelity audio world, and the Plinius P10 exemplifies their commitment to delivering exceptional sound quality. This robust stereo power amplifier is designed to meet the needs of audiophiles who demand both performance and reliability.

One of the standout features of the Plinius P10 is its impressive power output. Capable of delivering 200 watts per channel into an 8-ohm load, and even more at lower impedances, the P10 can drive a wide range of speakers with authority. This capability ensures that even the most demanding speaker systems can achieve their full potential, providing dynamic and engaging sound reproduction across all frequencies.

The P10’s build quality is equally remarkable. Designed with a solid aluminum chassis, the amplifier not only looks stunning but also minimizes electromagnetic interference, contributing to a cleaner audio signal. The internal components are meticulously selected, featuring high-grade capacitors, custom transformers, and high-current output transistors. This attention to detail results in a level of performance that is both sophisticated and reliable, ensuring long-term operational excellence.

One of the key technologies incorporated into the P10 is its direct-coupled architecture. This design eliminates the need for output capacitors, providing a more natural sound by preserving the integrity of the audio signal. Coupled with an advanced Class A/B operation, the amplifier delivers warmth and richness without sacrificing detail, making it ideal for critical listening sessions.

Another noteworthy aspect of the Plinius P10 is its flexible connectivity options. It comes equipped with both balanced XLR and unbalanced RCA inputs, allowing users to integrate it seamlessly into various audio systems. This versatility makes the P10 an excellent choice for both stereo and multi-channel configurations.

Heat management is crucial for any high-performance amplifier, and the P10 excels in this area as well. Designed with efficient thermal dissipation in mind, it features large heatsinks that help maintain optimal operating temperatures, even during extended listening sessions. This not only ensures consistent performance but also increases the amplifier's lifespan.

Audiophiles will appreciate the P10’s ability to deliver a sonic experience that captures the essence of the original recording. Its transparent soundstage, expansive imaging, and precise dynamics make it a standout choice for those serious about achieving audio nirvana.

In conclusion, the Plinius Audio P10 stereo power amplifier combines power, elegance, and advanced technology, making it an outstanding option for any audio enthusiast. With its ability to drive complex speaker loads effortlessly and produce a breathtaking soundstage, the P10 represents the very best in high-end audio engineering.