Plinius Audio P10 manual Amplifier Features Front Panel, Mute Switch, Class a Switch

Page 6

AMPLIFIER FEATURES – FRONT PANEL

MUTE

CLASS A

FRONT PANEL LAYOUT SHOWING MUTE AND BIAS SWITCHES

MUTE SWITCH

It is not recommended practice to interfere with the input cables while the amplifier is switched on and connected to the loudspeakers, so a Mute button is fitted to interrupt the input signal. This allows you to connect and disconnect the input cables without the necessity of turning the amplifier off.

When the amplifier powers up from start, the Mute automatically closes and has to be switched for normal listening. Press the button once to open the mute, and again to close it. The mute also disconnects the speakers while the LED is on.

CLASS A SWITCH

This switch on the right of the panel alters the operating bias of the amplifier. Press once to activate Class A, and again for Class AB. In Class A the LED is ON. Either mode may be used for listening, with Class A preferred.

CLASS AB: This position reduces the bias on the output stage to operate the amplifier in Class AB. This is a bias configuration used by the majority of high fidelity amplifiers. In Class AB your Plinius SA- Reference produces very high quality sound, suitable for all occasions where ‘super critical’ listening is not a priority. The quality of performance in this mode may exceed that of many other amplifiers so a dual benefit exists in that this facility provides the user with a much cooler operating temperature, and a much reduced demand on electricity particularly at idle (while the amplifier is not reproducing music). This unique feature allows you to leave the Plinius SA-Reference switched ON at all times, rendering the amplifier ready for use and requiring only a few minutes of warm-up in Class A before the very best of the amplifier's sonic qualities may be experienced.

6

Image 6
Contents Page Serial Number Final Test Certified By Design Philosophy Contents Precautions Amplifier Features Front Panel Mute SwitchClass a Switch Page Amplifier Features Rear Panel Amplifier Configuration SelectorAmplifier Configuration Selector ACS Input TerminalsBALANCED/UNBALANCED Signals Output Terminals StereoMains Power Cord IEC Connector Mains SwitchGround Lift Switch Output Terminals BRIDGED/MONOInstallation and Operation Placement and VentilationMains Voltage Connection INPUT/OUTPUT Connection Rear Panel Showing Location of INPUT/OUTPUT TerminalsRCA Stereo RCA Bridged MonoXLR Stereo BI-WIRING XLR Balanced MonoTermination Quality Connecting the Mains Supply Phasing or PolarityFuse Protection SA-REFERENCE FeaturesError Detection Ecologic ControlLED Brightness Control MAINS/LINE FuseLoudspeaker Selection WHY Class a is Better Specifications Index Pages 7,20Contact Details

P10 specifications

Plinius Audio has long been regarded as a pioneer in the high-fidelity audio world, and the Plinius P10 exemplifies their commitment to delivering exceptional sound quality. This robust stereo power amplifier is designed to meet the needs of audiophiles who demand both performance and reliability.

One of the standout features of the Plinius P10 is its impressive power output. Capable of delivering 200 watts per channel into an 8-ohm load, and even more at lower impedances, the P10 can drive a wide range of speakers with authority. This capability ensures that even the most demanding speaker systems can achieve their full potential, providing dynamic and engaging sound reproduction across all frequencies.

The P10’s build quality is equally remarkable. Designed with a solid aluminum chassis, the amplifier not only looks stunning but also minimizes electromagnetic interference, contributing to a cleaner audio signal. The internal components are meticulously selected, featuring high-grade capacitors, custom transformers, and high-current output transistors. This attention to detail results in a level of performance that is both sophisticated and reliable, ensuring long-term operational excellence.

One of the key technologies incorporated into the P10 is its direct-coupled architecture. This design eliminates the need for output capacitors, providing a more natural sound by preserving the integrity of the audio signal. Coupled with an advanced Class A/B operation, the amplifier delivers warmth and richness without sacrificing detail, making it ideal for critical listening sessions.

Another noteworthy aspect of the Plinius P10 is its flexible connectivity options. It comes equipped with both balanced XLR and unbalanced RCA inputs, allowing users to integrate it seamlessly into various audio systems. This versatility makes the P10 an excellent choice for both stereo and multi-channel configurations.

Heat management is crucial for any high-performance amplifier, and the P10 excels in this area as well. Designed with efficient thermal dissipation in mind, it features large heatsinks that help maintain optimal operating temperatures, even during extended listening sessions. This not only ensures consistent performance but also increases the amplifier's lifespan.

Audiophiles will appreciate the P10’s ability to deliver a sonic experience that captures the essence of the original recording. Its transparent soundstage, expansive imaging, and precise dynamics make it a standout choice for those serious about achieving audio nirvana.

In conclusion, the Plinius Audio P10 stereo power amplifier combines power, elegance, and advanced technology, making it an outstanding option for any audio enthusiast. With its ability to drive complex speaker loads effortlessly and produce a breathtaking soundstage, the P10 represents the very best in high-end audio engineering.