Farallon Communications NetLINE manual Windows NT

Page 13

INSTALLATION 13

WINDOWS NT 4.0

1.Double-click My Computer, then Control Panel, then

Network.

2.In the Network window, click the Adapters tab.

3.Click the Add button.

4.In the Select Network Adapters window, click the

Have Disk button.

5.Insert the Farallon Windows diskette and type A:.

6.In the Select OEM Option window, select Farallon NetLINE PC Card and click OK.

7.When prompted, select an available IRQ and I/O. Check WinNT Diagnostics for available resources.

8.When the Bus Location Windows opens, select:

Type: PCMCIA

Number: 0

9.Enter your TCP/IP information when prompted.

10.Click the Close button and Restart your computer.

Image 13
Contents Farallon 6120370-00-01 Contents Page Introduction Features Installation Installing the Hardware Installation Windows Installing the SoftwareTCP/IP Windows Windows NT Connecting to the Network Operation Netline Card Leds Eeprom Diagnostic UtilityPage Farallon Technical Support Chapter Appendix SpecificationsFCC Compliance Statement Regulatory NoticesVcci Certification CE MarkPage Limited Warranty and Limitation of Remedies Warranty