Farallon Communications NetLINE manual Diagnostic Utility, Eeprom

Page 17

OPERATION 17

DIAGNOSTIC UTILITY

Use the Diagnostic Utility included on the Farallon diskette as a troubleshooting tool.

1.Boot to MS DOS. (If you are using Win98/2000, use a Win95 startup disk.)

2.Insert the Farallon diskette in your computer’s disk drive.

3.Type ep16diag and Enter.

4.Select Adapter Basic Diagnostics and Enter.

5.Make sure all of the listed test items pass, including:

Current I/O Base Address

EEPROM

LAN Setup Registers

Memory

LAN Controller Functions

Loopback Mode Testing

6.If any items fail, try another card and connection to see if the problem is system related. If the other card passes, the problem may be related to the NetLINE PC Card.

Image 17
Contents Farallon 6120370-00-01 Contents Page Introduction Features Installation Installing the Hardware Installation Windows Installing the SoftwareTCP/IP Windows Windows NT Connecting to the Network Operation Netline Card Leds Eeprom Diagnostic UtilityPage Farallon Technical Support Chapter Appendix SpecificationsFCC Compliance Statement Regulatory NoticesVcci Certification CE MarkPage Limited Warranty and Limitation of Remedies Warranty