Profile HA1000 installation instructions Speaker Connections

Page 11

SPEAKER CONNECTIONS

Make the speaker connections using speaker wire that is at least 14 gauge or heavier.

As with any audio component, proper phasing of the amplifier and speakers is essential for strong bass response. When connecting, make sure that positive (+) from the amplifier is connected to the positive (+) of the speaker, and the same for negative (-).

TWO CHANNEL

HA700M & HA1000M

SPEAKER CONNECTIONS

SPEAKER CONNECTIONS

4 Ohm Speakers

(2 Ohm Minimum)

4 Ohm Speaker

(2 Ohm Minimum)

FOUR CHANNEL SPEAKER CONNECTIONS

Front Left

Front Right

Rear Left

Rear Right

4 Ohm Speakers

4 Ohm Speakers

(2 Ohm Minimum)

(2 Ohm Minimum)

10

Image 11
Contents Mosfet Power Amplifiers Recommendation IntroductionKeep Your Sales Receipt Safety Precautions Features and Benefits Remote Turn-on Adjustable Input SensitivityPower and Speaker Terminals Tri-Mode Capable Excluding HA700M & HA1000M modelsThermal Protection Protection IndicatorShort Circuit Protection Connect the B+ terminal of the amplifier to the cars battery Power ConnectionsMounting Location TWO Channel Signal Connections Signal ConnectionsHigh Level Connections Optional Speaker Connections Speaker Connections Bridged Speaker Connections TRI-MODE High Pass Setting with Treble Boost Setting the Crossover and BASS/TREBLE BoostLow Pass Setting with Bass Boost Setting the Gain Using Subsonic Filter and Phase ControlLook for Solution Trouble Shooting the SystemHA740 HA1040 SpecificationsHA400 HA600 HA1000 HA700M HA1000M Limited Warranty Warranty Repair Policy