SPEAKER CONNECTIONS (BRIDGED)
Two and four channel amplifiers are capable of being bridged ** into a mono configuration. This feature allows you the flexibility of using the amplifier to drive a subwoofer or a center channel. In this configuration the amplifier sums the right and left channel to deliver one channel (mono) output.
Please note: In order for the amplifier to sum left and right signal information, both left and right RCA connections must be made.
**CAUTION! In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any lower than 4 Ohms will cause internal damage to the amplifier!
TWO CHANNEL BRIDGED SPEAKER CONNECTIONS
4 Ohm Speaker
(Minimum)
FOUR CHANNEL BRIDGED SPEAKER CONNECTIONS
4 Ohm Speaker | 4 Ohm Speaker |
(Minimum) | (Minimum) |
11