Extreme Networks WiRanger manual User Guide

Page 19

User Guide

4.Wait for the LED’s on the LEX unit and the REX unit to stop blinking and for the Link LED to turn on.

NOTE: If the Link LED does not turn on within 30 seconds return to step 1.

5.The LEX unit and the REX unit are now Paired and are free to be unplugged and moved to their desired locations.

6.Once the units are installed in their specific locations, connect a USB cable between the WiRanger and the host PC to confirm the WiRanger’s operation. If the system has been installed and paired correctly it should be listed in Device Manager (for Windows installations), or System Profiler (for Mac OS X installations) under Universal Serial Bus controllers as a “Generic USB Hub”.

13

Image 19

Contents Cable Free USB 2.0 Hub User Guide Powered by ExtremeUSB TechnologyCE Statement FCC Radio Frequency Interference Statement WarningCable Free USB 2.0 Hub IC Statement Contents Page Introduction WiRanger Product ContentsRear View About the WiRangerLEX unit Front ViewREX unit Host LED Antenna connectorWiRanger LED Descriptions LED Name DescriptionWireless Operation Compatibility USB CablesBefore You Begin Installing the LEX unitInstalling the REX unit Establishing Wireless CommunicationConnecting a USB Device Checking the InstallationViewing the Current 802.11g Radio Channel Following instructions are for advanced users onlyChanging the 802.11g Radio Channel User Guide Advanced Setup Pairing a LEX unit and a REX unit User Guide Symptoms/Cause Remedy TroubleshootingSame Radio Channel, then attempt the Pairing Adapters to the WiRanger Symptoms/Cause Remedy USB 2.0 Ehci SpecificationsHardware Remedies Limited Hardware WarrantyLimitation of Liability Contacting Technical Support Obtaining Warranty ServiceUser Guide Icron Technologies Corporation