Installation and Hookup

The following connections are required for the M1XEP Ethernet Interface.

a.The DB9M 9-pin male connector should be connected to the DB9F 9-pin female serial port (port 0) on the Control using a standard 9-pin male to female serial cable (included). The unit should be mounted within 10 feet of the Control. The baud rate of the Control's serial port must be set to 115,200, which is the factory default.

b.The 2.1mm barrel type connector is used to connect a ELK-P1216 Plug-in Power Adapter (included). The M1XEP operates from 12 Volts DC and draws approximately 300 mA. The center pin of the barrel connector is positive.

Note: Any required network equipment, i.e. Ethernet switch, router, cable modem, etc. including the plug-in power supply for the M1XEP, MUST be backed up with an adequately sized UPS (Uninterruptible Power Supply) in order for the equipment to continue operating during brief power outages.

c.The RJ45 8-pin network jack is used to connect the M1XEP to a LAN/WAN Ethernet network switch or router. This requires a standard network 8-pin RJ45 terminated patch cable (not included).

d.The 5-pin connector along the side of the M1XEP is provided for future use. An ELK-WO35A cable is required (not supplied) to connect to it. DO NOT CONNECT anything to this connector at this time.

1.Turn Off the Master Power Switch before making any connections.

2.Connect the serial port cable from the Control to the M1XEP. Connect a network patch cable from the M1XEP to the LAN (local area network) switch or router. Then, connect the power cable from the P1216 plug-in power supply. Plug the P1216 into a 110V power outlet. The M1XEP should power up and attempt to link up with the Ethernet network.

3.It is now okay to power up the Control.

4.Enroll the M1XEP into the Control. Using the keypad, access the Installation Programming menu (Menu 9). Choose Bus Module Enrollment (Menu 1) and press the right arrow key to start the enrollment. When the enroll- ment is complete press the ELK or * (Asterisk) key to exit.

Note: The M1XEP does not connect to the RS-485 data bus on the control, therefore it will not appear in the list of devices enrolled into the control. However, the enrollment process is necessary to ensure proper supervision of the device. If the M1XEP is removed, it must be "un-enrolled" by completing the Bus Module Enrollment process to prevent an "Ethernet Trouble" from occurring.

5. Proceed to the Configuration and Setup.

ELK-M1XEP Installation Manual

Page 5

M1XEP specifications

The Elk M1XEP is a highly versatile and powerful control and communication module designed for the Elk M1 Gold and M1EZ8 security systems. This innovative device extends the functionality of your security system by allowing remote access and control over the network. With the M1XEP, users can efficiently manage their alarm systems, monitor the status of devices, and receive real-time notifications from anywhere with internet connectivity.

One of the standout features of the Elk M1XEP is its built-in Ethernet port, which enables direct connection to a local area network (LAN). This connectivity allows for seamless integration with home automation systems and third-party applications, making it ideal for tech-savvy users looking to enhance their home security. The module is designed with a user-friendly interface, allowing homeowners to easily configure and maintain their security settings through any compatible web browser.

Another significant advantage of the Elk M1XEP is its compatibility with various mobile devices. With the integration of apps available for both iOS and Android platforms, users can remotely access their security system on-the-go. This capability ensures that homeowners can always stay connected to their property, receiving alerts and responding to incidents promptly.

In terms of communication technologies, the Elk M1XEP supports IP communication and can notify users of any security breaches via email, text messages, or push notifications. This flexibility is essential for ensuring prompt action in case of emergencies. Furthermore, the device is compatible with the Elk M1 Control Panel, which allows for expanded features such as automation of lighting, temperature control, and even integration with popular smart home platforms.

The M1XEP boasts robust security features, including encryption, which safeguards the data transmission between the control panel and other devices. With this level of protection, users can have confidence that their security information is safe from prying eyes.

Overall, the Elk M1XEP is an indispensable addition for anyone looking to maximize the capabilities of their Elk security system. With its advanced features, seamless connectivity options, compatibility with mobile devices, and enhanced security measures, it stands as a leading choice for homeowners seeking a smarter, more reliable way to protect their property.