Enterasys Networks VSER-RPU-SYS manual LEDs, Led

1 About the Redundant Power Supply

LEDs

The following diagram and table describe the functions of the LEDs on the Front Panel.

Figure 1-2. LEDs

VSER-RPU-SYS

1 2

3 4 Fan

Table 1-1. Port Status LEDs

LED	Condition	Status
RPS 1, 2, 3, 4	On Green	Power is being supplied to the RPS, the unit is functioning
		normally, and the RPS port is connected to a switch.
	Flashing Green	Power is being supplied to the RPS, the unit is functioning
		normally, but no switch is connected to the RPS port.
	Off	Power is off, or a failure has occurred.
Fan	On Green	The fans are functioning normally.
	Flashing Red	One or more fans have failed.
	Off	The unit is not connected to an AC power source.

1-2