RECORD SELECTOR
This rotary switch allows recording of any of the five different inputs available on the back panel. Note that when recording, the source that is being listened to will not be interfered with. For example, it is possible to be listening to the CD input whilst recording from the TUNER input. Two tape decks can be connected and dubbing in either direction is possible. Note that in standby mode no input is selected.
VOLUME CONTROL KNOB
The volume control is an ALPS motorised unit that will accurately convey the source signals to the power amplification stage of the Plinius 8200. The knob can be adjusted manually or with the remote control supplied. When using the remote control to alter the volume level, stab the button to make small adjustments, or hold the button down to continuously adjust the volume.
MUTE/REMOTE LED
The LED directly below the volume knob serves two purposes. Firstly, whenever the Plinius 8200 is in mute, the LED will be lit. Secondly, whenever a button on the remote control is used, the LED will light to show the amplifier is receiving signal.
7