175-WATTS RMS PER CHANNEL INTO 8 OHMS.
BOTH CHANNELS DRIVEN FROM 20Hz TO 20kHz AT LESS THAN 0.2% TOTAL HARMONIC DISTORTION.
SFREQUENCY RESPONSE: 20Hz to 20kHz ±0.2dB.
SDISTORTION: Typically <0.05% THD at rated power. 0.2% THD and IM worst case prior to clipping.
SSATURATION: 200 Watts per channel or greater into 8Ω. 300 Watts per channel or greater into 4Ω.
SCURRENT OUTPUT: 35A short duration peak per channel. Fuse protected.
SRISE TIME: Typically 4∝s.
SSLEWING: 50V/∝s.
SHUM & NOISE: 90dB below rated output 20Hz to 20kHz unweighted.
SINPUT SENSITIVITY: 300mV RMS for rated output at 1kHz. 1.5mV RMS on Phono low gain setting. 0.75mV on Phono high gain setting.
SINPUT IMPEDANCE: 47kΩ.
SINPUT OVERLOAD: 5V RMS.
SPHONO STAGE GAIN (PHONO INPUT TO
SRATED PRE OUT LEVEL: 1.5V RMS into 47kΩ or higher. Maximum 6V RMS into 10kΩ or higher.
SPRE OUT SOURCE IMPEDANCE: Typically 5kΩ.
SPRE OUT MINIMUM RECOMMENDED LOAD: 47kΩ.
STAPE OUTPUT LEVEL: 190mV at 200Ω. Tape loop muting at 5V RMS input.
SHEIGHT: 120mm (4 3/4")
SWIDTH: 450mm (17 3/4")
SDEPTH: 380mm (15")
SWEIGHT: 13.5kg (29lbs)
17