Encore electronic ENLWI-NX2 manual Unpacking And Setup

Page 6

UNPACKING AND SETUP

UNPACKING AND SETUP

This section provides unpacking and setup information for the ENLWI-NX2 Wireless 802.11n PCI Adapter.

Unpacking

The box should contain the following items:

One ENLWI-NX2 PCI Adapter One Driver & Utility CD-ROM

If any item is found missing or damaged, please contact your local reseller for replacement.

Setup

Before installation, check the following:

Make sure your computer is running at least a 300MHz or above processor with 256MB RAM or above

zVisually inspect the PCI Adapter and make sure that it is fully plugged in to the PCI slot.

The operating system on your computer must be the following: Windows® 2000 (Service Pack 4), XP (Service Pack 2), Windows Vista™

A draft 802.11n or 802.11b/g access point.

Make sure the environment has minimal interference and obstructions.

2

Image 6

Contents IEEE 802.11n 2.0 Draft Wireless LAN PCI Adapter User’s Guide ENLWI-NX2Europe - EU Declaration of Conformity Federal Communication Commission Interference StatementIMPORTANT NOTE FCC Radiation Exposure Statement EN 60 950-1 2001 +A110560 Česky Czech Dansk Danish Deutsch German Eesti Estonian EnglishTABLE OF CONTENT Technical SpecificationsIntroduction Unpacking and SetupINTRODUCTION Overview of this User’s GuideUNPACKING AND SETUP SetupUnpacking Link Check the installationIDENTIFYING EXTERNAL COMPONENTS ACT ActivitySOFTWARE INSTALLATION Windows Based Utility InstallationPage 3 Click Finish to finish the installation and to restart the computer ENLWI-NX2 WIRELESS UTILITY SETTING Link InformationConfiguration Open or Shared Key WPA-PSK / WPA2-PSKWPA EAP-TLS Site Survey Profile Push the button on my access point 5 If the WPS configuration was failed, the follow window will show on Enter a PIN into my access point 5 If the WPS configuration was failed, the follow window will show on About TECHNICAL SPECIFICATIONS WirelessHardware