Enterasys Networks VH-8TX1UM, VH-8TX1MF manual Frame Buffering and Frame Latency, Software Download

Page 19

fails for any reason, a disabled alternative is activated, thereby maintaining the connection. This prevents network traffic from circulating in an endless loop formed by multiple connections to the same LAN segment.

Spanning Tree parameters are configurable using the Spanning Tree Configuration Menu of the console menus, the on-board Web agent, or via SNMP (see Appendix B, “Spanning Tree Concepts,” in the Management Guide for more information).

Frame Buffering and Frame Latency

The VH-8TX1UM/VH-8TX1MF switch is a store-and-forward switching device. Each frame is copied into switch memory before being forwarded to another port. This method ensures that all forwarded frames conform to a standard Ethernet frame size and have a correct cyclic redundancy check (CRC) for data integrity. This switching method prevents bad frames from traversing the network and using up valuable network bandwidth, as with cut-through switching technology.

To minimize the possibility of dropping frames on congested ports, the VH-8TX1UM/VH-8TX1MF switch provides 128 KB of frame buffering per port. This buffer space is used to queue packets for transmission on congested networks. This is an additional advantage over cut-through switching technology, which drops packets immediately when experiencing collisions.

Software Download

The VH-8TX1UM/VH-8TX1MF switch supports the industry-standard Trivial File Transfer Protocol (TFTP) for downloading software to the switch. All switch software is stored in a 2 MB sectored flash ROM. The download feature allows you to easily install software upgrades to the unit. Software can alternatively be downloaded via the serial console port using the XMODEM protocol.

A TFTP software download is invoked via the Management Setup Menu using the console menus. A TFTP download can also be invoked using the on-board Web agent or via SNMP.

Non-Volatile Parameter Storage

Important operating parameters such as IP addresses, Spanning Tree configuration, and management security parameters, are stored in non- volatile flash memory. These values are retained when the switch experiences power interruptions or is powered down for normal maintenance.

Configuration and Management Interfaces

The VH-8TX1UM/VH-8TX1MF switch can be managed using any of the following methods:

•Serial console, out-of-band

9033718-01

Product Overview 5

Page 18 Page 20
Image 19
Page 18 Page 20
Contents User Guide Vertical Horizon VH-8TX1UM/VH-8TX1MF Fast Ethernet SwitchPage 9033718-01 FCC Notice Warnhinweis Faseroptikanschlüsse Optische Sicherheit Safety Information Wichtige Sicherheitshinweise Germany Enterasys NETWORKS, INC Program License Agreement Viii Declaration of Conformity 9033718-01 Table of Contents Index Conventions PrefacePurpose AudienceOther Conventions OrganizationDescription Product OverviewTftp FeaturesFront Panel Components Front PanelSpanning Tree Protocol Feature SummariesRear Panel Ieee 802.1D BridgeNon-Volatile Parameter Storage Configuration and Management InterfacesFrame Buffering and Frame Latency Software DownloadRmon Port Security Port MirroringAuto-negotiation Multicast FilteringBroadcast Suppression Configuration Upload/DownloadBootP Full-Duplex ModeVirtual LANs VLANs Class of ServicePort Trunking Factory Default Settings Factory DefaultsApplication Examples Client/Server Network Application Client/Server Network ApplicationLocal Backbone Application Local Backbone ApplicationVH-8TX1UM/VH-8TX1MF Inspecting Your Shipment InstallationSite Requirements Mounting the Switch on a Table or Shelf Mounting the Switch in a Rack Mounting the Switch in a RackConsole Port Out-of-Band Connections Connecting a Terminal to the Console PortIn-Band Connections Remote Management via the Console PortConnecting the Power Cord Powering the SwitchCopper Network Cable RequirementsFiber 10Base-T/100Base-TX Ports Inserting an RJ-45 Connector into a Port100Base-FX Fiber Port Inserting an SC Fiber Connector into the Fiber PortVH-8TX1UM/VH-8TX1MF General Appendix A. Technical SpecificationsPhysical Specifications Electrical SpecificationsConsole Port Port Specifications10Base-T and 100Base-TX Ports MDI/MDI-X Crossover Cable Wiring Power Cord Set RequirementsGeneral Requirements Country-Specific Requirements Table A-3. Power Cord Set Requirements by CountryVH-8TX1UM/VH-8TX1MF Appendix B. Flow Control VH-8TX1MF Term Definition Appendix C. Acronyms & AbbreviationsUTP Index Index Web-based network manager Xmodem download, 5 VH-8TX1MF Page 150728-102 R02

VH-8TX1MF, VH-8TX1UM specifications

Enterasys Networks, a well-respected name in the field of networking technology, has introduced the VH-8TX1UM and VH-8TX1MF models, which cater to the ever-evolving needs of modern enterprises. These devices are designed to enhance connectivity, improve network performance, and provide enhanced security for users across various environments.

The VH-8TX1UM model is a versatile Layer 2/3 managed switch that features eight 10/100/1000BASE-T Ethernet ports. This configuration allows for seamless connectivity with existing network infrastructure while providing the necessary throughput for bandwidth-hungry applications. It supports a range of features including VLAN tagging, port mirroring, and link aggregation, making it ideal for both small and medium-sized businesses looking to scale their networks without significant hardware investments.

Meanwhile, the VH-8TX1MF model is designed with a focus on modularity. It not only features eight Ethernet ports but also includes slots for additional modules, allowing organizations to customize their network setup based on specific requirements. The modular design ensures flexibility, enabling future upgrades without the need for complete hardware replacements. This characteristic is particularly beneficial for companies that anticipate growth or changes in their network architecture.

Both models boast advanced technologies such as Quality of Service (QoS) and Power over Ethernet (PoE). QoS prioritizes critical network traffic, ensuring that voice and video applications receive the bandwidth they need for optimal performance. PoE allows for the powering of devices like IP cameras, phones, and wireless access points directly through the Ethernet cables, simplifying installations and reducing the need for additional power sources.

In terms of security, Enterasys equips the VH-8TX1UM and VH-8TX1MF with robust features to safeguard sensitive data. These include access control lists and port security settings, which protect against unauthorized access and mitigate potential threats. Additionally, the switches support network management protocols such as Simple Network Management Protocol (SNMP), enabling efficient monitoring and management of network performance.

Overall, the Enterasys VH-8TX1UM and VH-8TX1MF models stand out with their combination of performance, flexibility, and security. They present a compelling option for enterprises aiming to enhance their networking capabilities while ensuring that they are well-equipped to handle future technological advancements. Businesses investing in these switches are sure to benefit from a solid foundation that can evolve with their operational needs.
Top Page Image Contents