CONNECTING THE MAINS SUPPLY
Now that your Plinius SB-301 Power Amplifier is configured to your system correctly, the mains cable can be plugged into the IEC connector on the back of the amplifier. Once the power is connected, flick the main power switch on the front panel to the right. The power LED will pulse until the circuitry within the amplifier has stabilised. Once the amplifier has stabilised the power LED will stay lit, and the amplifier will be out of standby, ready for you to enjoy your new Plinius SB-301 Power Amplifier.
WARM-UP PERIOD
You will find that the Plinius SB-301 will sound its best after being on for a period of time. We usually recommend waiting at least 24 hours before expecting the best quality of sound reproduction from your amplifier. Also, as the Plinius SB-301 uses very little power while on, we suggest leaving the unit turned on so that it will always be at it’s sonic best.
