Plinius Audio SB-301 manual Input Terminals, Amplifier Configuration Selector ACS

Page 8

INPUT TERMINALS

Input terminals for your Plinius SB-301 Power Amplifier are easily accessible and fitted to the top centre area of the rear panel. A brief summary of connection possibilities is listed below, while a more detailed explanation follows later in this instruction manual.

RCA INPUTS LEFT & RIGHT: These standard RCA terminals are for use with unbalanced signals from most signal sources such as audio preamplifiers or home theatre processors.

XLR BALANCED INPUTS LEFT & RIGHT: XLR connectors fitted to this amplifier are for use with balanced line signals from audio preamplifiers or home theatre processors. Balanced signals are carried via a three way cable that connects all three pins at each end of the interconnect cable.

The XLR pin configuration used in all Plinius product is:

PIN 1 to GND

PIN 2 to +Signal

PIN 3 to -Signal

NOTE: Because of the way our XLR and balanced inputs are configured it is not possible to connect both XLR and RCA at the same time.

AMPLIFIER CONFIGURATION SELECTOR (ACS)

The Amplifier Configuration Selector (ACS) is a unique switching method that exploits all of the operational features of your Plinius SB-301 Power Amplifier. By using this switch it is possible to operate your amplifier with either balanced or unbalanced signals.

RCA STEREO

XLR STEREO

AM PLIFIER CONFIGURATION SELECTOR

REFER TO OW NERS M ANUAL FOR USAGE INSTRUCTIONS

AMPLIFIER CONFIGURATION SELECTOR

8

Image 8
Contents Page Serial Number Final Test Certified By Design Philosophy Contents Precautions Standby LED Amplifier Features Front PanelError LED Amplifier Features Rear Panel AM Plifier Configuration SelectorAmplifier Configuration Selector ACS Input TerminalsOutput Terminals BALANCED/UNBALANCED SignalsMains Switch Remote Trigger Terminals Ground Lift SwitchMains Power Cord IEC Connector Mains Voltage Connection Installation and OperationPlacement and Ventilation INPUT/OUTPUT Connection Rear Panel Showing Location of INPUT/OUTPUT TerminalsBI-WIRING XLR StereoTermination Quality Phasing or PolarityConnecting the Mains Supply WARM-UP PeriodError Detection Fuse ProtectionImportant do not FIT a Fuse with a Higher Rating LED Brightness ControlMAINS/LINE Fuse Loudspeaker Selection Specifications Index Contact Details