Plinius Audio SB-301 manual Specifications

Page 18

SPECIFICATIONS

310-WATTS CONTINUOUS PER CHANNEL INTO 8 OHMS. BOTH CHANNELS DRIVEN FROM 20Hz TO 20kHz.

FREQUENCY RESPONSE: 20Hz to 20kHz ±0.2dB. -3dB at 1Hz and -3dB at 70kHz.

DISTORTION: Typically <0.05% THD at rated power. 0.1% THD and IM worst case prior to clipping.

CURRENT OUTPUT: 50A short duration peak per channel. Fuse protected.

RISE TIME: Typically 5μs.

PHASE RESPONSE: +0° at 20Hz and -14°at 20kHz.

HUM & NOISE: 100dB below rated output 20Hz to 20kHz A-weighted.

INPUT IMPEDANCE: 47kΩ.

GAIN ON RCA INPUTS: 32dB

GAIN ON BALANCED INPUTS: 38dB

HEIGHT: 220mm (8 3/4")

WIDTH: 500mm (19 3/4")

DEPTH: 455mm (18")

WEIGHT: 38kg (83lbs)

18

Image 18
Contents Page Serial Number Final Test Certified By Design Philosophy Contents Precautions Amplifier Features Front Panel Error LEDStandby LED Amplifier Features Rear Panel AM Plifier Configuration SelectorAmplifier Configuration Selector ACS Input TerminalsBALANCED/UNBALANCED Signals Mains SwitchOutput Terminals Ground Lift Switch Mains Power Cord IEC ConnectorRemote Trigger Terminals Installation and Operation Placement and VentilationMains Voltage Connection INPUT/OUTPUT Connection Rear Panel Showing Location of INPUT/OUTPUT TerminalsTermination Quality BI-WIRINGXLR Stereo Phasing or PolarityConnecting the Mains Supply WARM-UP PeriodImportant do not FIT a Fuse with a Higher Rating Error DetectionFuse Protection LED Brightness ControlMAINS/LINE Fuse Loudspeaker Selection Specifications Index Contact Details