Intelligent Technologies (IT.) D77A I/O Module Products
Installation Without Backplane
Module Preparation
The DIN rail locking tab is located under the removable terminal on the front of the device. Remove the terminal to gain access to the locking tab.
1. Remove the terminal by unlocking the terminal tabs.
14 | 0 |
12 | 2 |
104
8 6
Figure 23: Removable Terminal Locking Tabs
2.Remove the terminal strip from the module.
3.Insert a screwdriver under the DIN rail locking tab and lift up to unlock the locking tab.
a
b | c |
Figure 24: Unlock DIN Rail Locking Tab
a)Tab
b)Locking Tab Captured
c)Locking Tab Released
28 | For more information visit: www.EatonElectrical.com | MN05002001E |