Eaton Electrical D77A user manual 0x8006 32774 Slave Address

	Intelligent Technologies (IT.) D77A I/O Module Products
Table 48: 0x8006 (32774) Slave Address
Size	Description
1 byte	This parameter specifies the address used by a Master for data transfers in the Master/Slave Data Protocol.
	The default value must be 0x00 (unconfigured), requiring a Master to set this value prior to using the Master/
	Slave Data Protocol.
Table 49: 0x8007 (32775) Production Destination
Size	Description
2 bytes	This parameter specifies the destination Node ID to be used by a device in either the Simple System or Wire
	Replacer Data Protocols. The MSB indicates the Group ID; the LSB indicates the Member ID.
	An Initial Value of 0x0000 indicates an unconfigured state. In this state, a device assumes a current value equal
	to its Group ID and a Member ID of 0x00. This results in its Production Data being targeted at all members of its
	Group.
Table 50: 0x8008 (32776) Device ID Tag
Size	Description
32 bytes	This parameter specifies the 32-character ASCII string ID tag assigned to a device, pre-assigned at the factory
	but can be set by the user.
Table 51: 0x8009 (32777) Production Interval
Size	Description

2 bytes

This parameter specifies the rate, in milliseconds, at which a producing device generates a Data Protocol message in either Simple System or Wire Replacer mode.

A value of 0 disables this timer.

Table 52: 0x800A (32778) Consumption Interval

Size	Description
2 bytes	This parameter is the value to which the consumption timer is set whenever there is a set of the current value of
	any parameter on the consumption list.
	Expiration of this interval causes the module to execute communications loss behavior.
	A value of 0 disables this timer.
Table 53: 0x800B (32779) Parameter List
Size	Description
92 bytes	This read-only list specifies the n QCPort Parameters that a device supports.
Table 54: 0x800C (32780) Production List
Size	Description
2 bytes	This 2n-byte read-only list specifies the n QCPort Parameters included in a device’s QCPort Data Parameter
	0x0001, Production Data.
	Setting Parameter Attribute 0x09, “Production List Member,” to TRUE, designates a Parameter’s membership in
	this list. Only Parameters supporting Attribute 0x09 are eligible for inclusion in this list.
	Ordering of Parameter IDs in the Production List is based first on Parameter data size and then sequentially
	within Parameters of like size. For example, all Parameters with an even number of bytes would appear first
	sequentially, followed by Parameters with an odd number of bytes.
Table 55: 0x800D (32781) Consumption List
Size	Description
2 bytes	This 2n-byte read-only list specifies the n QCPort Parameters included in a device’s QCPort Data Parameter
	0x0002, Consumption Data.
	Setting Parameter Attribute 0x0A, “Consumption List Member,” to TRUE, designates a Parameter’s membership
	in this list. Only Parameters supporting Attribute 0x0A are eligible for inclusion in this list.
	Ordering of Parameter IDs in the Consumption List is based first on Parameter data size and then sequentially
	within Parameters of like size. For example, Parameters with an even number of bytes would appear first
	sequentially, followed by Parameters with an odd number of bytes.
Table 56: 0x800E (32782) Languages Supported
Size	Description
n bytes	This is a list of languages supported in the product. It consists of a list of bytes, each representing a different
	language.
	0x00 — English
	0x01 — Spanish
	0x02 — French
	0x03 — German
	0x04 — Italian

MN05002001E For more information visit: www.EatonElectrical.com 51